ST-4 Autoguiding Adapter
# 8427
Instruction Manual
iOptron Corporation, 6E Gill Street, Woburn, MA 01801
Figure 2. ST-4 adapter is connected
Select Guider Direction
The Guide Port ST-4 adapter equipped is capable to handle an ST-4 autoguiding camera with a
straight or a reverse wired guiding cable. The default setting is straight. However, if your guiding
cable is reversed (the guiding would not be possible), you can simply open the ST-4 adapter cover
and move the jumper from normal to reverse position, as shown in Figure 3.
Figure 3. Inside of an ST-4 adapter
Figure 4 shows different wiring direction.
Figure 4. ST-4 wiring
May 2011 V2.0
iOptron reserves the rights to revise this instruction without notice. Actual color/contents/design may differ from those described in this
instruction.
3
|
Infinity Home Theater System TSS SUB4000 User Manual
Insignia Indoor Furnishings NS MG1344 User Manual
Invacare Car Video System HT500PC User Manual
IOGear GPS Receiver GICe711S3W6 User Manual
JBL Car Speaker CS2165C User Manual
Kawasaki Drill 840108 User Manual
Kenwood Car Satellite TV System KMD 870R User Manual
Kenwood Home Security System TK 7180 User Manual
KitchenAid Ice Maker KUIC15NLT User Manual
Kodak Digital Camera C763 User Manual