ADV10A
10.1" OVERHEAD LCD
MONITOR WITH
DVD PLAYER
OPERATION
MANUAL
128-8933a
FEATURES
Congratulations
Congratulations on your purchase of the ADVENT ADV10A
DVD Player with drop-down video / monitor. TheADV10Ahas
been designed to give you and your family many years of
video entertainment in the mobile environment. Please read
the directions that follow to familiarize yourself with the
product to ensure that you obtain the best results from your
equipment.
•
10.1” TFT (Thin Film Transistor) Active Matrix LCD
(Liquid Crystal Display) Monitor with LED Backlighting
•
•
Built-in DVD Player
OSD (On Screen Display) for Control of Picture Quality
and Functions
•
•
Selectable (M1 and M2) IR Receive and Transmit Codes
(See page 5.)
Note: Installation options vary, see the individual owner's
manuals for each component in your system to obtain a full
understanding of each component's operation.
Switchable Dual Channel IR Infrared Transmitter
(See page 5.)
•
•
•
•
•
•
•
•
•
Two Audio / Video Source Inputs (DVD, AV1/AUX)
Dome Lights with Built-in Three Way Switch
Built-in 16 Channel Wireless FM Modulator
Last Position Memory for DVD
Safety Precaution
For safety reasons, when changing video media it is
recommended that the vehicle is not in motion, and that you
do not allow children to unfasten seat-belts to change video
media or make any adjustments to the system. System
adjustments can be accomplished using the remote control,
while seat-belts remain fastened. Enjoy your ADVENT
entertainment system but remember the safety of all
passengers remains the number one priority.
Screen Mode Selection (4:3, 16:9)
Full Function Remote Control
Backlit Controls
AV Output via RCA Jacks
Plays DVD, CD and MP3 Discs
3
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW)
1
4. PLAY(u) Control
This control is used to start playback of a disc.
2
5. STOP (n) Control
3
4
5
6
- Press STOP once: Stops playback,
Pressing the PLAY button again will resume normal
playback from where movie was stopped.
- Press STOP twice and then press PLAY to start playback
from the beginning of the DVD.
7
8
6. EJECT () Control
This control is used for ejecting disc from the disc
compartment.
9
10
7. Three Position Dome Light Switch
ON - Turns on the dome lights.
OFF - The dome lights will not turn on in this position.
AUTO - Automatically switches on the dome lights in
conjunction with the vehicle's interior illumination.
11
12
8. Dome Lights
Provide additional interior illumination.
9. Ventilation Openings
10. LCD Cut Off Switch
Used to turn off the LCD backlight when the LCD is in the
closed position.
1. POWER ( ) Control
Used to turn the system on/off (standby).
2. Infrared Transmitter/Remote Sensor
(Location)
11. LCD Panel
12. Screen Release
Press to release the screen.
3. Source Select (S)
Use to select one of the two sources: DVD,AV1/AUX
4
CONTROLS AND INDICATORS DIAGRAM
SIDE VIEW
1
The ADV10A has an option that allows the user to select from two IR
transmit and receive codes (M1 or M2). This feature can be used when
using two ADV10As in the same installation or if the vehicle has a RSA
(Rear Seat Audio) that uses an “A” channel headset. The ADV10A comes
factory set to M1. When in the M1 mode, the unit will respond to remote
commands when M1 is selected on the remote control and will transmit
audio on the A channel. When in the M2 mode, the unit will respond to
remote commands when M2 is selected on the remote control and will
transmit audio on the B channel.
1. DVD Disc insertion Slot
For loading and removing discs. Insert the disc with the label
facing up.
Note: Use 2-channel IR headphones set to CH B when the monitor is
set to M2 mode.
BACK VIEW
Note: M1 will appear on the screen for 4~5 seconds.
Selecting a Monitor Code (M1 or M2)
1. Power ON the unit and wait until M1 on the OSD appears. M1 will
appear on the screen for 4~5 seconds. After M1 disappears, within
10 seconds press the M1 button on the remote control, then press
the TV button and continue to press code number 6353. The screen
will change from M1 to M2.
1 2 3
4
2. To change the monitor code from M2 to M1, repeat the above
instruction but press the M2 button, then the TV button, then 6353.
1. Auxiliary Video Input
2. Auxiliary Audio Left Input
3. Auxiliary Audio Right Input
FMM 88.3MHz
DVD
FMM 88.3MHz
DVD
M1
M2
4. Infrared Transmitter/Remote Sensor
(Location)
IRT ON
IRT ON
5
REMOTE CONTROL OPERATION
MAIN FUNCTION OPERATION
Initial Use
When purchased the remote control has a battery installed with a
Pull Tab to prevent battery discharge. Remove the Pull Tab before
attempting to use the remote.
POWER
SOURCE
EJECT
M1
TV
M2
1
2
30
MUTE
DVD
29
28
3
4
DVD SOURCE
VOLUME
PIX
5
6
27
SYSTEM MENU
DISC MENU
ZOOM
REPEAT
SUBTITLE
AUDIO
26
25
7
8
ENTER
24
9
DISPLAY
SETUP
23
22
10
CR2025
21
20
11
12
13
14
19
18
1
5
2
6
9
3
7
0
4
8
15
16
Battery Replacement
FMM
ON/OFF
IRT
ON/OFF
1. Remove the battery holder.
17
2. Insert one CR2025 battery into the battery holder. Be sure to
observe the correct polarity.
3. Align the battery holder with the remote control and insert.
Push it in until the holder clicks.
6
*
Function control is available on the unit and the Remote Control.
** Function not available in this model.
1. POWER*
Press this button to turn the unit ON and OFF.
2. MONITOR SELECT
M1 Button – Set the remote control code to allow control of the unit in M1 mode.
M2 Button** – Set the remote control code to allow control of the unit in M2 mode.
3. SOURCE*
Each time the button is pressed, the unit will cycle through modes DVD, AV1/AUX.
Note: When a video device is plugged into the AUX jack on the back of the unit, it will override any device plugged into the AV1 input.
4. TV Mode Select
Switches certain function keys on the remote control for monitor functions. (See Item number 7.)
5. DVD Source
This button is only active when the remote control is in DVD mode.
6. PIX ( Picture Select )
Each time this button is pressed, the OSD picture adjustment displays the “Adjustment Bar” for BRIGHTNESS, CONTRAST, COLOR,
TINT(For NTSC only) or RESET. Once the desired adjustment bar is displayed, use the VOLUME +/ VOLUME – button to adjust the
setting. The display will automatically turn off if no adjustments are made within 6 seconds.
7. SYSTEM MENU
Allow the user to access the system menu when the unit has been placed in TV mode. ( See Item number 4.) Press the cursor (pq) buttons to
select Picture Control, FMM, OSD Language, Source Default DVD, and Screen Mode.
8. CURSOR (pqtu)
Use these buttons to access menu selections on the screen.
7
9. ENTER
Used to implement a selected setting or menu option.
10. DISPLAY
Press to display the current disc information while the disc is playing. Press the cursor (pq) buttons to select the Title or Chapter. For
Title/Chapter selection use the numeric buttons to enter the desiredTitle /Chapter selection.
11. SCAN BACKWARD (7)
Press to search in a backward direction. Press repeatedly to change the search speed from 2, 4, 8, 16 times and normal speed.
12. PLAY (u)*
Press to activate the play mode while a disc is loaded into the disc compartment.
13. PREVIOUS (9)
Press to return to the previous chapter or track.
14. PAUSE (II)
Press to pause playback.
15. NUMBERS
Allow the user to ENTER the numbers 0-9 for selection of the tracks, titles, chapters or password setting.
16. FMM ON/OFF
Turns the FM Modulator power on/off.
17. IRT ON/OFF (Optional)
Turns the Infrared Transmitter on or off for IR wireless headphones.
18. NEXT (:)
Press to skip to the next chapter or track.
8
19. STOP(<)*
Press to stop playback. (Playback will resume from the point it is stopped).
Press twice at once to stop playback fully. (Playback will resume from the beginning of the disc).
20. SCAN FORWARD (8)
Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, 16 times and normal speed.
21. AUDIO
Press to display and select audio language in DVD mode. Each time you press the button, the language changes.
Note:The available languages vary from disc to disc.
22. SETUP
Press to display the Setup menu which allows the user to change the DVD player options such as LANGUAGE, VIDEO, RATING &
MISC.
Note: The unit must be set to DVD mode by pressing the DVD button prior to pressing the SETUP button.
23. SUBTITLE
Press to display and select the subtitle language in DVD mode. Each time you press the button, the subtitle language changes.
Note:The type and number of languages for subtitle vary from disc to disc.
24. REPEAT
Allows the user to repeat a selected title, chapter, or track.
25. DISC MENU
Allow the user to access the disc’s menu mode.
9
26. ZOOM
Press this button to enlarge the picture when playing a DVD disc.
Press ZOOM button
DVD player perform
Once
Second
Third
Q1- Enlarge the picture 2 times of the original size
Q2- Enlarge the picture 3 times of the original size
Q3- Enlarge the picture 4 times of the original size
Q off- Picture is returned to original size
Forth
27. VOLUME DOWN (-) or UP(+)
Press to decrease or increase the volume.
Press to decrease or increase the level of the picture adjustments after the picture select button (PIX) is pressed.
28. DVD Mode Select Button
Switches certain function keys on the remote control for DVD function.
29. MUTE
Press this button to mute the audio for wireless FMM, IR headphones and wired headphones.
Pressing the button again restores the audio to the previously set level.
30. EJECT ()*
Press this button to eject the disc.
10
TURNING THE UNIT ON OR OFF
1. Push in the Screen Release button to unlock the LCD screen. The screen will drop down slightly.
2. Pivot the screen downward until a comfortable viewing angle is reached. The hinge friction will hold the screen in position while the system is
in use.
3. Press the power button on the unit or the remote control to turn the system on and off. When in use, the internal backlighting will
illuminate the controls.
4. After the unit has been turned on and is displaying a picture, adjust the viewing angle by pivoting the screen to optimize the picture quality.
5. Remember to turn the unit off and pivot the LCD screen to the locked position when not in use.
Power
ON/OFF
Remote Sensor
Button Infrared Transmitter
Screen Release
11
SYSTEM MENU SETTINGS AND ADJUSTMENTS
The System Menu contains features and options that let you customize your system. For example, you can change the screen mode
display, OSD language, and source default.
Using the System Menu
1) Press the TV button and then the SYSTEM MENU button on the remote. The main page of the system menu will appear on screen.
2) Use the cursor buttons p or q to select the desired item in the main page and press the ENTER button to select.
3) The submenu will appear on screen.
4) Use the cursor buttons p or q to select an item in the sub menu and then press the ENTER button to select.
5) Press the System Menu button to exit System Menu.
Note: The System Menu can be controlled via Remote Control only. (Items selected in the menu will have a green background.)
PICTURE CONTROL SELECT
When watching a program, the picture quality can be adjusted to the user’s preferences.
1) Press the SYSTEM MENU button on the remote and the on screen picture adjustment displays the “adjustment bar” for BRIGHTNESS,
CONTRAST, COLOR, TINT (for NTSC only) or RESET.
2) Use the cursor buttons p or q to highlight PICTURE CONTROL and press ENTER. The PICTURE CONTROL menu will be displayed.
3) Use the cursor buttons p or q to select the desired adjustment and press ENTER.
4) Use the cursor buttons p or q or the + or - buttons to change the settings. Press ENTER when the adjustment is finished.
PICTURE CONTROL
BRIGHTNESS
CONTRAST
COLOR
TINT
RESET
12
FMM
The FM Modulator allows the user to listen to audio through the vehicle’s radio.
FMM ON
FMM OFF
- Turns the wireless FM Modulator on if audio playback through your vehicle’s radio is preferred.
- Turns the wireless FM Modulator off.
FMM SELECT - Selects the wireless FM Modulator Frequency (CH1 - 88.1MHz, CH2 - 88.3MHz, CH3 - 88.5MHz, CH4 - 88.7MHz,
Ch5 - 88.9MHz, Ch6 - 89.1MHz, CH7 - 89.3MHz, CH8 - 89.5MHz, CH9 - 89.7MHz, CH10 - 89.9MHz, CH11 - 90.1MHz,
CH12 - 90.3MHz, CH13 - 90.5MHz, CH14 - 90.7MHz, CH15 - 90.9MHz, CH16 - 91.1MHz).
FMM
FMM ON
FMM OFF
FMM SELECT
To choose a FM frequency for audio playback through your vehicle’s radio:
1. Access the System Menu. Press the TV button on the remote control, then press the SYSTEM MENU button. The SYSTEM MENU
screen appears.
2. Press the q cursor button to highlight FMM, then press the ENTER button. The FMM screen appears.
3. Press the q cursor button to highlight FMM SELECT, then press the ENTER button. The FMM SELECT screen appears.
FMM SELECT
88.1 Mhz
88.3 Mhz
88.5 Mhz
89.7 Mhz
89.1 Mhz
90.1 Mhz
90.3 Mhz
90.5 Mhz
90.7 Mhz
90.9 Mhz
91.1 Mhz
88.7 Mhz
88.9 Mhz
89.1 Mhz
89.3 Mhz
89.5 Mhz
4. Press the pqt or u cursor buttons to select a frequency not used by a radio station in the area. Press the ENTER button to select the
highlighted frequency. Tune your vehicle’s radio to the selected frequency.
5. Press the DVD button to restore control of the DVD functions.
13
OSD LANGUAGE
This function allows the user to select the on-screen display language.
The user can select English, Spanish, French or German for the OSD
language.
OSD LANGUAGE
SOURCE DEFAULT DVD
This allows the user to set the system default source to DVD.
Notes:
• If source default is set to ON, every time the unit is turned off then on, the
unit will power up and automatically switch the source to DVD. If source
default is set to OFF and the unit is turned off then on, the unit will power
up in whatever source was last selected.
• The unit is set to source default DVD on as the default mode of operation.
• Selection of Source default can only be made from within the system menu.
SCREEN MODE SELECT
This allows the user to change the screen format (aspect ratio 4:3, 16:9).
To select the screen aspect ratio format:
SCREEN MODE
1. Highlight SCREEN MODE and press the ENTER button to access the
submenu.
2. Press the Cursor button p or q to select 4:3 or 16:9.
3. Press the ENTER button to confirm the setting.
14
DVD SETUP MENU SETTINGS AND ADJUSTMENTS
The DVD Setup Menu contains features and options that let you customize your DVD player. For example, you can set a language for the
on-screen display or prevent children from viewing DVD playback of adult DVD Titles.
Using the Setup Menu
1. Press the DVD button and then the SETUP button on the remote. The Setup Menu appears on the
: English
: Off
OSD Language
Subtitle
Language
screen as shown per diagram.
Video
2. Use the p or q cursor buttons to highlight the settings to be changed. Use the u cursor button to
highlight the sub-setttings. Press the u cursor button to open the submenu that contains the different
options available. Press the ENTER button to set the desired option.
3. Use the t cursor button to position the highlight back on the icon side of the setup page to set the
other options. Repeat steps 1~2.
: English
Rating
Audio
Misc
4. Press the SETUPbutton again to exit the Setup Menu.
LANGUAGE SETUP
DVD Language for On-Screen Display
OSD MENU: The OSD MENU setup allows you to select the language for the on-screen display.
The user can select English, French, Spanish, German or Italian for the OSD language.
OSD Language
Subtitle
Language
English
French
Spanish
German
Italian
Video
Rating
Audio
Misc
15
DVD SUBTITLE SETUP
1. Select "SUBTITLE" using the pq button, then press the u button to enter the submenu.
2. Select the subtitle you desire using the pq button, then press “ENTER” to confirm the setting.
OSD Language
Subtitle
Language
English
French
Video
Spanish
3. Press the t button to return.
Note: The subtitle selection is only available for discs that are recorded in the above listed languages. If the selected,
language is not available, the player will play and display on the screen the original language contained in the disc.
German
Italian
Rating
Audio
Chinese
Japanese
Misc
Thai
Off
DVD AUDIO SETUP
1. Select "AUDIO" using the pq button, then press the u button to enter the submenu.
2. Select the audio language you desire using the pq button, then press “ENTER” to confirm the setting.
OSD Language
Subtitle
Language
English
Video
French
3. Press the t button to return.
Note: The audio language selection is only available for discs that are recorded in the listed languages. If the selected,
language is not available, the player will play and display on the screen the original language contained in the disc.
Spanish
Rating
Audio
German
Italian
Misc
Chinese
Japanese
Thai
DVD VIDEO SETUP
TV Display
TV display
TV type
4:3
The TV DISPLAY setup allows you to set the screen aspect ratio.
4:3 - This displays the wide picture with black bands on the upper and lower portions of the screen.
16:9 - This displays a wide picture with black bands on the upper and lower portion of the screen.
The bandwidth will vary, depending on the aspect ratio of the disc.
Language
16:9
Video
Rating
Misc
TV Type
The TV Type setup allows you to select the television standard which corresponds to your TV.
NTSC - Select this type for NTSC TV.
PAL - Select this type for PAL TV.
MULTI - Select this type for multi-system TV.
16
DVD RATING SETUP
Parental
This item allows you to limit the content of movie playback from G toAdult. The lower the value, the
more strict the control.
1. G
2. PG
3. PG – 13
4. R
5. NC – 17
6.Adult
The rating level can only be changed when the correct password is provided.
For first time use to change parental control:
Language
: 6.Adult
Change Password
Parental
Video
1. Use the cursor u button to enter parental mode.
2. Key in the default password (3308) and press ENTER.
3. Press the ENTER button again to select the parental level, select the level and press ENTER.
Rating
Misc
Change Password
To change the password to your own password:
Parental
: 6.Adult
Language
Change Password
Video
1. Select “Change Password” mode and enter the default password (3308) followed by pressing ENTER.
2. Press the ENTER button again and key in a new four digit password.
Enter Password
Rating
Misc
Note: The Default Password is 3308. This password is always effective even after you have selected your own password and changed it. To avoid the possibility
of others using the default password to set the parental level and change the password, you can record this default password in another area and delete it from this
manual. Some discs can be limited depending on the age of users while some discs cannot.
Language
Load Factory
: On
DVD Misc SETUP
1. Select "MISC” using the pq button, then press the u button to enter the Misc menu.
2. Select the option you want to change using the pq button, then press ENTER.
Screen Saver
Video
Rating
Misc
17
Load Factory
This option allows you to reset all options to factory settings.
Note: This function will not affect the Rating control settings.
Load Factory
Language
Load Factory
S
Yes
Video
No
Rating
Misc
Screen Saver
This option allows you to set the Screen Saver mode.
ON - Screen saver will appear
Load Factory
Off
On
Language
Screen Saver
Video
OFF - Screen saver will not appear
Rating
Note: The DVD player will enter Screen Saver mode if the unit is inactive for approximately 2 minutes.
Misc
PLAYING DVDs
1. Press the DISPLAY button on the remote control to display the status banner. The banner includes title, chapter, angle, audio, subtitle, and
time.
2. Title Selection
Press the numeric (0~9) buttons to initiate a change of title selection. Then press ENTER to implement the selection.
3. Chapter Selection
Press the numeric (0~9) buttons to initiate a change of chapter selection. Then press ENTER to implement the selection.
18
PLAYING MP3 DISCS
MP3 is a format for storing digital audio. An audio CD-quality song can be compressed into the MP3 format with very little loss of quality,
while taking up much less space. CD-R discs that have been encoded in MP3 format can be played on DVD player. The DVD player plays
the songs in the order they were burned on to the disc. When playback is started the elapsed time of the track that is playing will be
displayed.
Selecting Folders and Songs
When a device containing MP3 files is loaded in the player, the navigation menu appears automatically.
1. Press p or q to move the highlight to the desired folder (if present) on the left side of the menu and press ENTER. The songs in the folder will
be displayed on screen.
2. Press p or q to move the highlight to the desired track containing the song and press ENTER to begin track playback.
Skipping Songs
Use the Next (:) button on the remote control to move to the next song. Use the Previous (9) button to move to the previous song.
Selecting a Play Mode
Filter (For MP3 & JPEG only)
00:00:01
1/12
/
Filter
Audio
Photo
Video
001
002
The Filter Mode enables or disables the display of files contained on the media based on their file extension.
The filter function applies to the following formats:
Flat Mo
Repeat :
003
004
005
006
Audio - Audio data format (MP3, WMA)
Music Playing
Photo - Photo data format (JPEG)
Video - Video data format (MPEG ,
)
Flat Mode: play the entire disc
00:00:01
1/12
/
This mode is always on (default). During the Flat Mode, all the data folder with MP3, JPEG, and movies will be played in
sequence. If the Flat Mode function is off, it will only play the selected folder; other folders are disabled.
Flat Mode
001
002
Repeat
Mode
:
Off
:
Normal
003
004
005
006
Music Playing
19
Repeat: play repetitively
00:00:01
Repeat function has 4 options : Off, Single, Folder, All. Move cursor to Repeat function and press ENTER,
Each time ENTER is pressed the unit will cycle through the available options. Off/Single/Folder/All are
displayed in that order. Repeat default is Off.
1/12
/
Flat Mode
001
002
Repeat
Mode
:
Off
:
Normal
003
004
005
006
Music Playing
Off
- Turn off repeat function.
Single - Repeat the song being played until STOP is pressed.
Folder - Play all songs in a folder repetitively.
All
- Play all songs on the disc repetitively.
Mode: play mode
00:00:01
The Mode function has 4 options: Normal, Shuffle, Random and Music Intro. Move cursor to the Mode
function area and press ENTER repeatedly until the desired mode is displayed.
Normal/Shuffle/Random/Music Intro are displayed in that order. The Mode function default is Normal.
1/12
/
Flat Mode
001
002
Repeat
Mode
:
Off
:
Normal
003
004
005
006
Normal
Shuffle
Random
- Play all songs in folder once.
Music Playing
- Play songs in a folder in a shuffle order. Each song in the folder is played only once.
- Play songs in a folder in a random order. Each song in a folder is’t only be played once.
Music Intro - Play each song in order in the folder for 10 seconds.
Remark – The Music Intro function provides the user with a sample of each song for 10 seconds,
thereby making it easy to select and listen to a favorite song.
Add to program
00:00:01
To add the selected songs into Browser view, make sure disc playback is off. Move the cursor to
the Edit mode function and press ENTER. After Edit mode is selected, move cursor to songs list and
select the songs which will be compiled. Press ENTER. A check mark appears to the left of the selected song.
1/12
/
001
002
Edit mode
Program view
Add to program
003
004
005
006
Music Playing
To add the selected songs to the program, move cursor to the “Add to program” function and
press ENTER. The selected songs are added into a new program list and the check mark will disappear on
the playlist. Move the cursor to the “Program view” function and press ENTER to browse the songs in the
program. Press the PLAY button to play the selected songs.
Album:------------
20
00:00:01
Clear program
1/12
/
001
002
Edit mode
Broser view
To clear the selected song files, press the STOP button twice during playback mode. Move the
cursor to the Edit mode function and press ENTER. After Edit mode is selected, move cursor to selected
songs list and select the songs which you want to delete. Press ENTER. A check mark will appear to
the left of the selected song. Move the cursor to clear program and press ENTER. The selected songs will be
deleted from the play list.
Clear program
003
004
005
006
Music Playing
Album:------------
DVD Basics
To get the optimum use out of the DVD Player, make sure you read this section completely.
DVD Region Code
The DVD player is preset to a region code at the factory depending on where the DVD player is sold. A DVD from a different region cannot be
played in this unit and the unit will display "WRONG REGION”
Region 1 - USA, Canada
Region 2 - Japan, Europe, South Africa, Middle East,
Greenland
Region 3 - S. Korea, Taiwan, Hong Kong, Parts of
South East Asia
Region 4 - Australia, New Zealand, Latin America
(including Mexico)
Region 5 - Eastern Europe, Russia, India, Africa
Region 6 - China
21
Types of Discs your DVD will play
Your system will play the following types of discs:
• DVD* disc - DVD discs which contain video.
• Audio disc - Audio CDs contain musical or sound content only.
• MP3 disc - A disc that contains audio files (for example, a CD-R with downloaded MP3 files).
*Note: This system is capable of playing most recordable DVD formats. However, due to the variety of disc manufacturers and
software, playback cannot be guaranteed.
Loading and Playing Discs
Before you load a disc, make sure that it is compatible with the player. Insert the disc with the label facing the vehicle’s headliner.
Note: The following Discs CANNOT be used with this player:
• MiniDisc
• Laserdisc
• CD-1, CD-ROM, DVD-ROM, Super Audio CD (SACD), DVD Audio, JPEG
• Blu-ray Disc
To load and play a disc:
1. Press the Power button to turn the unit on.
2. Select DVD mode and insert the disc (label facing upwards) into the disc compartment.
22
OVERHEAD DOME LIGHTS
The Dome Lights integrated into the unit are controlled by a three position slide switch. Sliding the switch to the ON position will turn
the lights ON. The OFF position will prevent the lights from turning ON with the vehicle's interior lighting. The AUTO position will allow the
lights to turn ON and OFF with the vehicle's interior lighting. Refer to the Installation Guide for wire connections. Do not leave the vehicle
unattended with the dome light switch in the ON position, as this could result in a discharged battery.
ACCESSORIES
WIRELESS HEADPHONES
The ADV10A includes a built-in infrared transmitter for use with the supplied wireless headphones. The headphone volume is adjusted
using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the
transmitter, as infrared transmissions, like visible light, travel only in a straight line. See the documentation accompanying your wireless
headphones.
Note: If the monitor is set to M2 mode, the headphones supplied with this unit will not work, as these headphones are single channel. Only
two-channel wireless headphones (Audiovox Model IR2CHS) will work with this unit when set to M2 mode. The only time it is necessary to
set this unit to M2 mode is if there is an RSA (Rear Seat Audio) installed in the vehicle or if two of these monitors are installed in one
vehicle. Key in the default password (6353) to change the M1 mode to M2 mode or M2 mode to M1 mode.
SOURCE FEATURE
AV1
The AV1 input may be connected to a external video source, video game system, or other audio / video devices. To access the audio / video
inputs, inputs, turn the unit on and press the S (source) button or the Source button on the remote control until "AV1/AUX" is displayed on the
screen. Turn the video source component on with its power button or remote control and it is now ready to play the audio and video signals from
the source connected toAV1.
AUX
The unit will accept an audio / video input through the 3 RCA jacks located on the rear of the unit. The audio / video device could be a
video game system, video camera, or other input device. To access the audio / video inputs, turn the unit on and press the S (source)
button or the Source button on the remote control until "AV1/AUX" is displayed on the screen. Turn the video source component on with its
power button or remote control and it is now ready to play the audio and video signals from the source connected to AV1. At the same time
AV1 video and audio will be cutoff.
23
AV Out
The unit provides an AV output for optional video monitor(s). This output will provide the AV signals that duplicate the picture/audio being
processed by the unit to an additional monitor or video display. Please see your installer for more information.
TROUBLESHOOTING
PROBLEM
SOLUTION
Verify that the batteries in the remote are fresh.
IR remote inoperative
Verify that the remote sensor eye is not obstructed.
If the monitor is set to M1, press the M1 button on the remote control. If the monitor
is set to M2, press the M2 button on the remote control. (See page 5.)
Disc won't play
Insert a disc with the label side facing upwards.
Check the type of disc you put into disc tray. This DVD only plays DVD, audio CD and
MP3.
Both the unit and the disc are coded by region. If the regional codes don’t match, the
disc can’t be played.
Play starts, but then stops immediately
No sound or distorted sound
The disc is dirty. Clean it.
Condensation has formed. Allow player to dry out.
Make sure your DVD is connected properly. Make sure all cables are securely
inserted into the appropriate jacks.
If you are using the 2-channel IR headphones, make sure you turn on the IR
headphone power, make sure the correct channel (A-B) is selected.
Make sure the Modulator is ON and the proper Frequency has been selected.
Make sure that unit is set to M1 when using Single Channel Headphones.
24
PROBLEM
SOLUTION
Can’t advance through a movie
It can’t advance through the opening credits and warning information that appear
at the beginning of movies because the disc is programmed to prohibit that action.
Not allowed at the moment
The feature or action cannot be completed at this time because:
1. The disc’s software restricts it.
2. The disc’s software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. Requested a title or chapter number that is out of range.
Picture is distorted
The disc might be damaged. Try another disc.
It is normal for some distortion to appear during forward or reverse scan.
No forward or reverse scan
Some discs have sections that prohibit rapid scanning or title and chapter skip.
If you try to skip through the warning information and credits at the beginning of a
movie, you won’t be able to. This part of the movie is often programmed to prohibit
skipping through it.
25
REPLACEMENT PARTS
SPECIFICATIONS
Remote Control
136-4840
LCD Backlighting
Resolution
LED
800 (RGB) x 480
1,152,000
Pixels
Operation Temperature
Storage Temperature
Back Light Life
Video Display System
Video Output
32 ~131º F (0 ~ 55º C)
-4 ~ 158º F (-20 ~ 70º C)
10,000 Hours
NTSC / PAL
1.0 Vp-p @ 75 ohms
12 VDC
Power Source
Dimensions
L x W x H
11.0" x 9.5" x 1.7"
289mm x 243mm x 44mm
Specifications are subject to change without notice.
26
ADVENT LIMITED WARRANTY
Applies to ADVENT Mobile Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that, should this product or any part thereof
(except game controllers), under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original
purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
If your new vehicle’s radio, CD/DVD player is covered by the manufacturer’s warranty for a period of 48 months as set forth in the OEM Warranty
Booklet, the company will extend the Advent Mobile Video product warranty for the same period of time. This is not applicable to extended warranty
purchases beyond the original manufacturer’s warranty. A game controller, if supplied, is similarly warranted for ninety (90) days.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale),
specification of defect(s), transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation,
removal or reinstallation of the product, or to damage to digital memory/media devices, gaming devices, discs, speakers, accessories, or vehicle electrical
systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration,
improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF
THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT,
SHALLTHE COMPANY'S LIABILITYEXCEEDTHE PURCHASE PRICE PAID BYPURCHASER FORTHE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY
HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITH IN A PERIOD NOT EXCEEDING 12
MONTHS AFTER EXPIRATION OF THE WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGES FOR BREACH OF THIS ORANY OTHER WARRANTY. No person or representative is authorized to assume for the Company any liability other
than expressed herein in connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above
limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to
state.
Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788 1-800-645-4994
128-7188B
27
© 2011 ADVENT, 150 Marcus Blvd. Hauppauge, NY 11788
128-8933a
|