ADTRAN Switch NetVanta 1524 User Manual

For more detailed documentation, visit us online at www.adtran.com

Installing the NetVanta 1524 Series Switch

P/N 1200560L1

Quick Start Guide

4. The initial GUI screen appears.

1 GETTING STARTED — ACCESSING THE GUI

Two configuration methods are available for your NetVanta Switch:

•

Web-Based GUI (discussed in this section)

AOS CLI (discussed on page 2)

You may access the web-based GUI from any web browser on your network by

following these steps:

1. Connect the switch to your PC using the ETH 0/0 port on the back of the

unit.

2. Set your PC to obtain an IP address automatically (or if using a fixed IP

address, set your PC to 10.10.20.2).

3. Enter the unit’s IP address in your browser address line (see example,

below). The default IP address is 10.10.20.1.

4. You will then be prompted for the username and password (the default

settings are admin and password).

Quick Start Guide, 61200560L1-13A, November 2004

Technical Support 1-888-4ADTRAN (1-888-423-8726)