Alpine Car Stereo System CDE 9880R User Manual

FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN  
AUTOMÓVILES/SOLO PER L’UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ТОЛЬКО  
ДЛЯ ИСПОЛЬЗОВАНИЯ В АВТОМОБИЛЯХ/DO UŻYCIA TYLKO W SAMOCHODZIE/ΓΙΑ ꢀΡΗΣΗ Μ Ν ΣΕ ΑΥΤ ΚΙΝΗΤ  
EN  
DE  
FR  
ES  
IT  
R
RDS MP3/WMA/AAC CD Receiver  
CDE-9880R/  
CDE-9882Ri  
• OWNER’S MANUAL  
• ANVÄNDARHANDLEDNING  
Please read before using this equipment.  
Innan du använder utrustningen bör du läsa  
igenom denna användarhandledning.  
• BEDIENUNGSANLEITUNG  
Lesen Sie diese Bedienungsanleitung  
bitte vor Gebrauch des Gerätes.  
• GEBRUIKERSHANDLEIDING  
Lees deze aanwijzingen aandachtig alvorens  
dit toestel te gebruiken.  
• MODE D’EMPLOI  
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ  
Прочтите настоящее руководство перед  
началом использования оборудования.  
SE  
NL  
RU  
PL  
GR  
Veuillez lire avant d’utiliser cet appareil.  
• MANUAL DE OPERACIÓN  
INSTRUKCJA OBSŁUGI  
Léalo antes de utilizar este equipo.  
Prosimy zapoznać się z tą instrukcją przed  
przystąpieniem do użytkowania urządzenia.  
• ISTRUZIONI PER LUSO  
Si prega di leggere prima di utilizzare il  
attrezzatura.  
ΕΓꢀΕΙΡΙ∆Ιꢁ ꢀΡΗΣΤΗ  
Παρακαλꢂύµε διαꢃάστε τꢂ πριν  
ꢄρησιµꢂπꢂιήσετε τη συσκευή.  
ALPINE ELECTRONICS MARKETING, INC.  
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.  
161-165 Princes Highway, Hallam  
ALPINE ITALIA S.p.A.  
Viale C. Colombo 8, 20090 Trezzano  
Sul Naviglio (MI), Italy  
1-1-8 Nishi Gotanda,  
Shinagawa-ku,  
Tokyo 141-0031, Japan  
Phone 03-5496-8231  
Victoria 3803, Australia  
Phone 03-8787-1200  
Phone 02-484781  
ALPINE ELECTRONICS GmbH  
Frankfurter Ring 117,  
80807 München, Germany  
Phone 089-32 42 640  
ALPINE ELECTRONICS DE ESPAÑA, S.A.  
Portal de Gamarra 36, Pabellón, 32  
01013 Vitoria (Alava)-APDO 133, Spain  
Phone 945-283588  
ALPINE ELECTRONICS OF AMERICA, INC.  
19145 Gramercy Place, Torrance,  
California 90501, U.S.A.  
Phone 1-800-ALPINE-1 (1-800-257-4631)  
ALPINE ELECTRONICS OF U.K. LTD.  
Alpine House  
Fletchamstead Highway, Coventry CV4 9TW, U.K.  
Phone 0870-33 33 763  
ALPINE ELECTRONICS (BENELUX) GmbH  
Leuvensesteenweg 510-B6,  
1930 Zaventem, Belgium  
ALPINE ELECTRONICS OF CANADA, INC.  
777 Supertest Road, Toronto,  
Ontario M3J 2M9, Canada  
Phone 1-800-ALPINE-1 (1-800-257-4631)  
Phone 02-725-13 15  
ALPINE ELECTRONICS FRANCE S.A.R.L.  
(RCS PONTOISE B 338 101 280)  
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,  
B.P. 50016, 95945 Roissy Charles de Gaulle  
Cedex, France  
Phone 01-48638989  
Designed by ALPINE Japan  
68-09359Z29-B  
 
ENGLISH  
Contents  
File/Folder Name Search  
(concerning MP3/WMA/AAC) ...................13  
Adjusting Subwoofer Level/Bass Level/Treble  
(Between Front and Rear)/Defeat ...............15  
Setting RDS Reception Mode and Receiving  
RDS Stations ................................................. 9  
Setting PTY31 (Emergency Broadcast)  
reception ...................................................... 10  
Receiving Traffic Information While Playing  
CD or Radio ............................................... 10  
(PLAY MODE) .............................................19  
1-EN  
 
Playing MP3/WMA/AAC Files with the USB  
memory (Optional) ...................................... 20  
Select Playlist/Artist/Album/Genre/  
Composer ....................................................22  
2-EN  
 
Operating Instructions  
WARNING  
CAUTION  
This symbol means important instructions.  
Failure to heed them can result in injury or  
material property damage.  
WARNING  
This symbol means important instructions.  
Failure to heed them can result in serious injury  
or death.  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.  
Failure to do so may cause personal injury or damage to the  
product. Return it to your authorized Alpine dealer or the nearest  
Alpine Service Centre for repairing.  
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR  
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.  
Any function that requires your prolonged attention should only be  
performed after coming to a complete stop. Always stop the vehicle  
in a safe location before performing these functions. Failure to do  
so may result in an accident.  
PRECAUTIONS  
Product Cleaning  
Use a soft dry cloth for periodic cleaning of the product. For more  
severe stains, please dampen the cloth with water only. Anything  
else has the chance of dissolving the paint or damaging the plastic.  
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL  
HEAR OUTSIDE NOISES WHILE DRIVING.  
Excessive volume levels that obscure sounds such as emergency  
vehicle sirens or road warning signals (train crossings, etc.) can be  
dangerous and may result in an accident. LISTENING AT LOUD  
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING  
DAMAGE.  
Temperature  
Be sure the temperature inside the vehicle is between +60°C  
(+140°F) and –10°C (+14°F) before turning your unit on.  
Moisture Condensation  
You may notice the CD playback sound wavering due to  
condensation. If this happens, remove the disc from the player and  
wait about an hour for the moisture to evaporate.  
DO NOT DISASSEMBLE OR ALTER.  
Doing so may result in an accident, fire or electric shock.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.  
(Check with your dealer if you are not sure.) Failure to do so may  
result in fire, etc.  
Damaged Disc  
Do not attempt to play cracked, warped, or damaged discs. Playing  
a bad disc could severely damage the playback mechanism.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE  
REACH OF CHILDREN.  
Swallowing them may result in serious injury. If swallowed,  
consult a physician immediately.  
Maintenance  
If you have problems, do not attempt to repair the unit yourself.  
Return it to your Alpine dealer or the nearest Alpine Service  
Station for servicing.  
USE THE CORRECT AMPERE RATING WHEN REPLACING  
FUSES.  
Failure to do so may result in fire or electric shock.  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Doing so may cause heat to build up inside and may result in fire.  
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.  
Use for other than its designed application may result in fire,  
electric shock or other injury.  
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN  
INSERTION SLOTS OR GAPS.  
Doing so may result in personal injury or damage to the product.  
3-EN  
 
           
Never Attempt the Following  
Installation Location  
Do not grip or pull out the disc while it is being pulled back into the  
player by the automatic reloading mechanism.  
Do not attempt to insert a disc into the unit when the unit power is  
off.  
Make sure this unit will not be installed in a location subjected to:  
Direct sun and heat  
High humidity and water  
Excessive dust  
Excessive vibrations  
Correct Handling  
Do not drop the disc while handling. Hold the disc so you will not  
leave fingerprints on the surface. Do not affix tape, paper, or  
gummed labels to the disc. Do not write on the disc.  
CORRECT  
Inserting Discs  
Your player accepts only one disc at a time for playback. Do not  
attempt to load more than one disc.  
Make sure the label side is facing up when you insert the disc.  
“ERROR” will be displayed on your player if you insert a disc  
incorrectly. If “ERROR” continues to be displayed even though the  
disc has been inserted correctly, push the RESET switch with a  
pointed object such as a ballpoint pen.  
INCORRECT  
CORRECT  
Playing a disc while driving on a very bumpy road may result in  
skips, but this will not scratch the disc or damage the player.  
Disc Cleaning  
New Discs  
Fingerprints, dust, or soil on the surface of the disc could cause the  
CD player to skip. For routine cleaning, wipe the playing surface  
with a clean, soft cloth from the centre of the disc to the outer edge.  
If the surface is heavily soiled, dampen a clean, soft cloth in a  
solution of mild neutral detergent before cleaning the disc.  
To prevent the CD from jamming, “ERROR” is displayed if discs  
with irregular surfaces are inserted or if discs are inserted  
incorrectly. When a new disc is ejected immediately after initial  
loading, use your finger to feel around the inside of the centre hole  
and outside edge of the disc. If you feel any small bumps or  
irregularities, this could inhibit proper loading of the disc. To  
remove the bumps, rub the inside edge of the hole and outside edge  
of the disc with a ballpoint pen or other such instrument, then insert  
the disc again.  
Centre Hole  
Centre Hole  
New Disc  
Disc Accessories  
There are various accessories available on the market for protecting  
the disc surface and improving sound quality. However, most of  
them will influence the thickness and/or diameter of the disc. Using  
such accessories can cause the disc to be out of standard  
specifications and may create operational problems. We  
recommend not using these accessories on discs played in Alpine  
CD players.  
Outside  
(Bumps)  
Bumps  
Irregular Shaped Discs  
Be sure to use round shape discs only for this unit and never use  
any special shape discs.  
Use of special shape discs may cause damage to the mechanism.  
Transparent Sheet  
Disc Stabilizer  
4-EN  
 
On handling Compact Discs (CD/CD-R/CD-RW)  
CAUTION  
Do not touch the surface.  
Do not expose the disc to direct sunlight.  
Do not affix stickers or labels.  
Clean the disc when it is dusty.  
Make sure that there are no bumps around the disc.  
Do not use commercially available disc accessories.  
Alpine accepts no responsibility for lost data, etc., even if data, etc.,  
is lost while using this product.  
On Handling USB Memory  
To prevent malfunction or damage, note the following points.  
Read the USB memory Owner’s Manual thoroughly.  
Do not touch the terminals by hand or metal.  
Do not subject USB memory to excessive shock.  
Do not bend, drop, disassemble, modify or soak in the water.  
Avoid usage or storage in the following locations:  
Anywhere in the car exposed to direct sunlight or high  
temperatures.  
Anywhere the possibility of high humidity or corrosive  
substances are present.  
Fix the USB memory in a location where driver operation will  
not be hindered.  
USB memory may not function correctly at high or low  
temperature.  
Use only certified USB memory. Note that even certified USB  
memory, may not function correctly depending on its type or  
state.  
Do not leave the disc in the car or the unit for a long time. Never  
expose the disc to direct sunlight. Heat and humidity may damage  
the CD and you may not be able to play it again.  
To customers using CD-R/CD-RW  
If a CD-R/CD-RW cannot be played back, make sure the last  
recording session was closed (finalized).  
Finalize the CD-R/CD-RW if necessary, and attempt playback  
again.  
About media that can be played  
Use only compact discs with the label side showing the CD logo  
marks below.  
USB memory function is not guaranteed. Use USB memory  
according to the terms of agreement.  
Depending on the settings of the USB memory type, memory  
state or encoding software, the unit may not play back or display  
properly.  
If you use unspecified compact discs, correct performance cannot  
be guaranteed.  
You can play CD-Rs (CD-Recordables)/CD-RWs (CD-  
ReWritables) which have been recorded only on audio devices.  
You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC  
formatted audio files.  
A file that is copy-protected (copyright protection) cannot be  
played back.  
USB memory may take time to start playback. If there is a  
particular file other than audio in the USB memory, it may take  
considerable time before the file is played back or searched.  
The unit can play back “mp3”, “wma” or “m4a” file extensions.  
Do not add the above extensions to a file other than audio data.  
This non-audio data will not be recognized. The resulting  
playback may contain noise that can damage speakers and/or  
amplifiers.  
It is recommended to back up important data on a personal  
computer.  
Do not remove the USB device while playback is in progress.  
Change SOURCE to something other than USB, then remove the  
USB device to prevent possible damage to its memory.  
Some of the following CDs may not play on this unit:  
Flawed CDs, CDs with fingerprints, CDs exposed to extreme  
temperatures or sunlight (e.g., left in the car or this unit), CDs  
recorded under unstable conditions, CDs on which a recording  
failed or a re-recording was attempted, copy-protected CDs  
which do not conform to the audio CD industry standard.  
Use discs with MP3/WMA/AAC files written in a format  
compatible with this unit. For details, see pages 13-14.  
ROM data other than audio files contained in a disc will not  
produce sound when played back.  
Protecting the USB connector  
Windows Media and the Windows logo are trademarks, or  
registered trademarks of Microsoft Corporation in the United  
States and /or other countries.  
Only a USB memory can be connected to the USB connector on  
this unit. Correct performance using other USB products cannot  
be guaranteed.  
iPod is a trademark of Apple Inc., registered in the U.S. and  
other countries.  
“MPEG Layer-3 audio coding technology licensed from  
Fraunhofer IIS and Thomson.”  
“Supply of this product only conveys a license for private,  
non-commercial use and does not convey a license nor imply  
any right to use this product in any commercial (i.e. revenue-  
generation) real time broadcasting (terrestrial, satellite, cable  
and/or any other media), broadcasting/streaming via internet,  
intranets and/or other networks or in other electronic content  
distribution systems, such as pay-audio or audio-on-demand  
applications. An independent license for such use is required.  
If the USB connector is used, be sure to connect it to the unit  
using a USB extension cable (sold separately). A USB hub is not  
supported.  
Depending on the connected USB memory device, the unit may  
not function or some functions may not be performed.  
The audio file format that can be played back on the unit is MP3/  
WMA/AAC.  
Artist/song name, etc., can be displayed, however characters  
may not be correctly displayed.  
5-EN  
 
 
3
Grasp the front panel firmly, slide to the left  
then pull to remove.  
, and  
Getting Started  
(OPEN) MUTE  
The front panel may become hot in normal usage (especially the  
connector terminals on the back of the front panel). This is not a  
malfunction.  
To protect the front panel, place it in the supplied carrying case.  
When detaching the front panel, do not apply excessive force as it  
may result in malfunction.  
Rotary encoder  
SOURCE/  
Do not leave the front panel open, or drive the car with the panel  
open as it may result in an accident or malfunction.  
Accessory List  
Attaching  
Head unit ............................................................................1  
Power cable........................................................................1  
FULL SPEEDTM Connection Cable  
(CDE-9882Ri only)..............................................................1  
Mounting sleeve.................................................................1  
Carrying case.....................................................................1  
Rubber Cap ........................................................................1  
Hex Bolt ..............................................................................1  
Screw (M5 × 8)....................................................................4  
Owner’s Manual .......................................................... 1 set  
1
Insert the right side of the front panel into the main  
unit. Align the groove on the front panel with the  
projections on the main unit.  
2
Push the left side of the front panel until it locks  
firmly into the main unit.  
Turning Power On and Off  
Press SOURCE/ to turn on the unit.  
Before attaching the front panel, make sure that there is no dirt or  
dust on the connector terminals and no foreign object between the  
front panel and the main unit.  
Attach the front panel carefully, holding the sides of the front panel to  
avoid pushing buttons by mistake.  
The unit can be turned on by pressing any other button except  
(OPEN).  
Press and hold SOURCE/ for at least 2 seconds to  
turn off the unit.  
The first time power is turned on, the volume will start from level 12.  
Detaching and Attaching the Front Panel  
Detaching  
1
2
Turn off the unit power.  
Press  
(OPEN) to open the front panel.  
To close the front panel, press the left side until it locks as  
shown in the figure below.  
6-EN  
 
       
Initial System Start-Up  
Be sure to press the RESET switch when using the unit for the first  
time, after changing the car battery, etc.  
1
2
Turn off the unit power.  
Press  
(OPEN) to open the front panel, and then  
remove it.  
3
Press RESET with a ballpoint pen or similar pointed  
object.  
RESET switch  
Adjusting Volume  
Turn the Rotary encoder until the desired sound is  
obtained.  
Lowering Volume Quickly  
Activating the Audio Mute function will instantly lower the volume  
level by 20 dB.  
Press MUTE to activate the MUTE mode.  
The audio level will decrease by about 20 dB.  
Pressing MUTE again will bring the audio back to its  
previous level.  
Controllable with Remote Control  
This unit can be controlled with an optional Alpine remote  
control. For details, consult your Alpine dealer.  
Point the optional remote control transmitter at the remote  
control sensor.  
Remote control sensor  
Connectable to Steering Remote Control Interface Box  
You can operate this unit from the vehicle’s control unit when  
an Alpine Steering Remote Control Interface Box (optional) is  
connected. For details, contact your Alpine dealer.  
7-EN  
 
     
Presetting Stations Automatically  
Radio  
1
2
Press BAND/TA repeatedly until the desired radio  
band is displayed.  
Rotary encoder  
SOURCE/  
BAND/TA TUNE/A.ME  
/ENT  
Press and hold TUNE/A.ME for at least 2 seconds.  
The frequency on the display continues to change while the  
automatic memory is in progress. The tuner will  
automatically seek and store 6 strong stations in the  
selected band. They will be stored into preset buttons 1 to 6  
in order of signal strength.  
When the automatic memory has been completed, the tuner  
goes to the station stored in preset location No.1.  
If no stations are stored, the tuner will return to the original station  
you were listening to before the auto memory procedure began.  
Preset buttons  
(1 through 6)  
F/SETUP  
/ESC  
Tuning to Preset Stations  
Listening to Radio  
1
2
Press BAND/TA repeatedly until the desired band is  
displayed.  
1
2
Press SOURCE/ to select TUNER mode.  
Press any one of the station preset buttons  
(1 through 6) that has your desired radio station in  
memory.  
Press BAND/TA repeatedly until the desired radio  
band is displayed.  
F1 (FM1)  
F2 (FM2)  
F3 (FM3)  
MW  
LW  
F1 (FM1)  
The display shows the band, preset number and frequency  
of the station selected.  
3
Press TUNE/A.ME to select the tuning mode.  
DX SEEK (Distance mode) SEEK (Local mode)  
If the  
indicator is illuminated, turn off the indicator by  
pressing F/SETUP, and then you can perform the operation.  
OFF (Manual mode)  
DX SEEK  
The initial mode is Distance mode.  
Frequency Search Function  
Distance mode:  
Both strong and weak stations will be automatically tuned in  
(Automatic Seek Tuning).  
You can search for a radio station by its frequency.  
1
2
Press and hold  
Radio mode to activate Frequency search mode.  
/ENT for at least 2 seconds in  
Local mode:  
Only strong stations will be automatically tuned in (Automatic  
Seek Tuning).  
Turn the Rotary encoder to select the desired  
frequency.  
Manual mode:  
The frequency is manually tuned in steps (Manual tuning).  
3
Press  
/ENT to receive the selected frequency.  
4
Press  
Holding down  
or  
to tune in the desired station.  
or will change the frequency  
Press and hold  
/ESC for at least 2 seconds in the search mode to  
continuously.  
cancel. Or, the search mode will be cancelled if no operation is  
performed for 10 seconds.  
Presetting Stations Manually  
1
2
Select the radio band and tune in a desired radio  
station you wish to store in the preset memory.  
Press and hold, for at least 2 seconds, any one of the  
preset buttons (1 through 6) into which you wish  
to store the station.  
The selected station is stored.  
The display shows the band, preset number and station  
frequency memorized.  
A total of 30 stations can be stored in the preset memory (6 stations  
for each band; FM1, FM2, FM3, MW and LW).  
If you store a station in a preset memory which already has a station,  
the current station will be cleared and replaced with the new station.  
If the  
indicator is illuminated, turn off the indicator by  
pressing F/SETUP, then you can perform the operation.  
8-EN  
 
           
Recalling Preset RDS Stations  
RDS  
1
2
3
Press F/SETUP so that the  
indicator lights up.  
Rotary encoder  
BAND/TA  
/ENT  
Press 1 AF to activate the RDS mode.  
Press F/SETUP to activate the normal mode.  
The  
indicator goes out.  
4
Make sure that the  
then press the preset button in which your desired  
RDS station is preset.  
indicator light goes out,  
If the preset station’s signal is weak, the unit automatically  
searches and tunes to a stronger station in the AF  
(Alternative Frequencies) list.  
VIEW F/SETUP  
3 PTY  
/ESC 1 AF NEWS 2  
5
If the preset station and the stations in the AF list  
cannot be received:  
When the PI SEEK setting is on (refer to “PI SEEK Setting”  
on page 10), the unit searches again for a station in the PI  
(Programme Identification) list.  
Setting RDS Reception Mode and  
Receiving RDS Stations  
If there are still no stations receivable in the area, the unit  
displays the frequency of the preset station and the preset  
number disappears.  
If the signal level of the Regional (Local) station being tuned  
becomes too weak to receive, press the same preset button  
to tune in a Regional station in other district.  
The RDS (Radio Data System) is a radio information system using the  
57 kHz subcarrier of regular FM broadcast. The RDS allows you to  
receive a variety of information such as traffic information, station  
names, and to automatically re-tune to a stronger transmitter that is  
broadcasting the same programme.  
1
2
3
Press F/SETUP so that the  
indicator lights up.  
For presetting the RDS stations, refer to the Radio Operation section.  
The RDS stations can be preset in the F1, F2 and F3 bands only.  
Press 1 AF to activate the RDS mode.  
Operate the unit while the  
indicator lights up. If no operation  
indicator goes out.  
is performed for 10 seconds, the  
Press  
or  
to tune in the desired RDS  
station.  
Receiving RDS Regional (Local)  
Stations  
4
5
Press 1 AF again to deactivate the RDS mode.  
Press F/SETUP to activate the normal mode.  
The  
indicator goes out.  
1
2
3
Press and hold F/SETUP for at least 2 seconds to  
activate the SETUP mode.  
When the “Setting PTY31 (Emergency Broadcast) reception” (refer  
to page 10) is set to on, if the unit receives the PTY31 (Emergency  
Broadcast) signal, the unit will show “ALARM” in the display  
automatically.  
Turn the Rotary encoder to select the RDS  
REGIONAL mode, and then press  
/ENT.  
Operate the unit while the  
is performed for 10 seconds, the  
indicator lights up. If no operation  
indicator goes out.  
Turn the Rotary encoder to select ON or OFF.  
In the OFF mode, the unit automatically keeps receiving the  
related local RDS station.  
The RDS digital data includes the following:  
PI  
Programme Identification  
Programme Service Name  
List of Alternative Frequencies  
Traffic Programme  
PS  
AF  
TP  
4
Press and hold F/SETUP for at least 2 seconds to  
return to normal mode.  
TA  
EON  
Traffic Announcement  
Enhanced Other Networks  
Press  
/ESC to return to the previous mode.  
If no operation is performed for 60 seconds, the unit will return to  
normal mode automatically.  
9-EN  
 
       
If the traffic information broadcast signal falls below a certain level,  
the unit remains in the receiving mode for 1 minute. If the signal  
remains below a certain level for over 1 minute, the “TA” indicator  
blinks.  
If you do not want to listen to the traffic information being received,  
lightly press BAND/TA to skip that traffic information message. The  
TA mode will remain in the ON position to receive the next traffic  
information message.  
If the volume level is changed while receiving traffic information, the  
changed volume level will be memorized. When traffic information is  
received next time, the volume level will be automatically adjusted to  
the level memorized.  
PI SEEK Setting  
1
2
Press and hold F/SETUP for at least 2 seconds to  
activate the SETUP mode.  
Turn the Rotary encoder to select the PI SEEK  
mode, and then press  
/ENT.  
3
4
Turn the Rotary encoder to select ON or OFF.  
In the TA mode, the SEEK tuning selects only the TP stations.  
Press and hold F/SETUP for at least 2 seconds to  
return to normal mode.  
Press  
/ESC to return to the previous mode.  
If no operation is performed for 60 seconds, the unit will return to  
normal mode automatically.  
PTY (Programme Type) Tuning  
1
2
Press F/SETUP so that the  
indicator lights up.  
Press 3 PTY to activate the PTY mode, while the  
unit is in Radio (FM receiving) mode.  
The Programme Type of the station being currently received  
will be displayed for 10 seconds.  
If there is no receivable PTY broadcast, “NO PTY” will be  
displayed for 10 seconds.  
Setting PTY31 (Emergency Broadcast)  
reception  
Turn PTY31 (Emergency Broadcast) reception ON/OFF.  
1
2
3
Press and hold F/SETUP for at least 2 seconds to  
activate the SETUP mode.  
If no RDS station can be received, the display shows “NO  
PTY”.  
If no operation is performed for 10 seconds after pressing 3 PTY, the  
PTY mode will be automatically cancelled.  
Turn the Rotary encoder to select ALERT PTY31,  
and then press  
/ENT.  
3
Press  
or  
within 10 seconds after  
Turn the Rotary encoder to select ON or OFF.  
If you set to ON, emergency broadcasts are received  
regardless of source. “ALARM” is displayed during  
reception.  
activating the PTY mode to choose the desired  
programme type while the PTY (programme type) is  
being displayed.  
Each press scrolls the programme type by one.  
4
Press and hold F/SETUP for at least 2 seconds to  
return to normal mode.  
4
Press 3 PTY within 10 seconds after selecting the  
programme type to start searching for a station in  
the selected programme type.  
The chosen programme type display blinks during  
searching and lights when a station is found.  
When an emergency broadcast is received, the volume  
level will be automatically changed to the memorized level  
in the traffic information mode. For details, refer to  
“Receiving Traffic Information” on page 10.  
If no PTY station is found, “NO PTY” will be displayed for 10  
seconds.  
Pressing  
mode.  
/ESC during the procedure will return to the previous  
If no operation is performed for 60 seconds in the SETUP mode, the  
setting mode is cancelled.  
5
Press F/SETUP to activate the normal mode.  
Operate the unit while the  
is performed for 10 seconds, the  
indicator lights up. If no operation  
indicator goes out.  
Receiving Traffic Information  
Receiving Traffic Information While  
Playing CD or Radio  
1
2
Press and hold BAND/TA for at least 2 seconds so  
that the “TA” indicator lights up.  
Press  
or  
to select your desired traffic  
1
2
Press and hold BAND/TA for at least 2 seconds so  
that the “TA” indicator lights up.  
information station.  
When a traffic information station is tuned in, the “TP”  
indicator lights up.  
Press  
or  
to select a traffic information  
station if necessary.  
Traffic information is heard only when it is being broadcast.  
If traffic information is not being broadcast, the unit is set in  
the standby mode. When a traffic information broadcast  
begins, the unit automatically receives it and the display  
shows “TRF-INFO” for 5 seconds.  
When a traffic information broadcast starts, the unit  
automatically mutes the CD player or the regular FM  
broadcast.  
When the traffic information broadcast finishes, the unit  
automatically returns to the original source play before the  
traffic information broadcast began.  
When the traffic information broadcast is over, the unit will  
automatically set in the standby mode.  
10-EN  
 
         
When traffic information stations cannot be received:  
In the CD mode:  
CD/MP3/WMA/AAC  
When the TP signal can no longer be received, the traffic  
information station of another frequency will be selected  
automatically.  
SOURCE/  
Rotary encoder  
/ENT  
The receiver is equipped with the EON (Enhanced Other Networks)  
function in order to keep track of additional alternate frequencies to  
the AF list. The “EON” indicator lights up while an RDS EON  
station is being received. If the station being received does not  
broadcast the traffic information, the receiver automatically tunes in  
the related station that broadcasts the traffic information when it  
occurs.  
(OPEN)  
/
3
Press and hold BAND/TA for at least 2 seconds to  
deactivate the Traffic Information mode.  
The “TA” indicator goes out.  
VIEW  
4 5  
/ESC  
Priority News  
Playback  
This function allows you to preset to give priority to the News  
programme. You will never miss the News programme as the unit  
automatically gives priority to the News programme whenever it begins  
broadcasting, and interrupts the programme you are currently listening.  
This feature is functional when your unit is set to a mode other than the  
LW and MW modes.  
1
2
Press  
The front panel will open.  
(OPEN).  
Insert a disc with the label side facing up.  
The disc will be pulled into the unit automatically.  
1
2
Press F/SETUP to activate the function mode while  
the unit is in Radio (FM receiving) mode.  
Press NEWS 2 to activate the PRIORITY NEWS  
mode.  
The “NEWS” indicator appears in the display.  
To disable the PRIORITY NEWS function, press NEWS 2.  
Close the front panel manually, and the “DISC IN” indicator  
lights up.  
When a disc is already inserted, press SOURCE/ to  
switch to the DISC mode.  
In the PRIORITY NEWS function, unlike in the TA function, the  
volume does not increase automatically.  
3
Press F/SETUP to activate the normal mode, while  
the unit is in Radio (FM receiving) mode.  
The mode will change every time the button is pressed.  
TUNER  
DISC  
USB AUDIO  
iPod*1/AUX+*2  
Operate the unit while the  
is performed for 10 seconds, the  
indicator lights up. If no operation  
indicator goes out.  
BT AUDIO*3  
TUNER  
1
* Displayed only when the iPod is connected and AUX+ SETUP is set  
to OFF, refer to “Setting the AUX+ SETUP Mode” (page 20).  
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting  
the AUX+ SETUP Mode” (page 20).  
* Only when BLUETOOTH IN is set to ADAPTE, refer to “Setting the  
2
Displaying Radio Text  
3
Text messages from a radio station can be displayed.  
Bluetooth Connection” (page 18).  
Press VIEW while receiving FM in the radio mode to  
select the Radio Text display.  
3
While playing back MP3/WMA/AAC, press  
select the desired folder.  
or  
to  
Pressing and holding  
continuously.  
or  
will change folders  
The display will change every time the button is pressed.  
If there is PS (Programme Service Name):  
PS (Programme Service Name)*  
PS (Programme Service Name)  
RADIO TEXT  
4
Press  
or  
to select the desired track (file).  
Returning to the beginning of the current track (file):  
* Press and hold VIEW for at least 2 seconds if PS is displayed in the  
radio mode, frequency will be displayed for 5 seconds.  
Press  
.
Fast backward:  
If there is no PS (Programme Service Name):  
Press and hold  
.
FREQUENCY  
RADIO TEXT  
FREQUENCY  
Advancing to the beginning of the next track (file):  
The display shows “WAITING” for a few seconds, then starts  
scrolling the text message.  
Press  
.
Fast forward:  
Press and hold  
.
If there is no receivable text message or the unit cannot receive a text  
message properly, the display shows “NO TEXT”.  
5
To pause playback, press  
/
.
Pressing again will resume playback.  
/
11-EN  
 
       
6
After pressing  
press to eject the disc.  
(OPEN) to open the front panel,  
M.I.X. (Random Play)  
Do not remove a CD during its eject cycle. Do not load more than  
one disc at a time. A malfunction may result from doing either.  
If the CD does not eject, press and hold  
The “DISC IN” indicator lights up when a disc is inserted.  
The CD-player can play discs containing audio data, MP3 data,  
WMA data and AAC data.  
Press 5  
in the play or pause mode.  
The tracks (files) on the disc will be played back in random  
sequence.  
for at least 2 seconds.  
To cancel M.I.X. play, press 5  
again.  
WMA format files that are protected by DRM (Digital Rights  
Management), AAC format files that have been purchased from  
iTunes Music Store and files that are copy-protected (copyright  
protection) cannot be played back on this unit.  
“MP3” is displayed during MP3 playback.  
“WMA” is displayed during WMA playback.  
“AAC” is displayed during AAC playback.  
The track display for MP3/WMA/AAC data playback is the file  
numbers recorded on the disc.  
The playback time may not be correctly displayed when a VBR  
(Variable Bit Rate) recorded file is played back.  
CD mode :  
: The tracks are played back in random  
sequence.  
MP3/WMA/AAC mode :  
: Only files in a folder are played back in  
random sequence.  
MP3/WMA/AAC Play Display  
The folder number and file number will be displayed as  
described below.  
*
: The files are played back in random sequence.  
* In the USB mode, all files stored in the USB memory are played back  
in random sequence, and the “M.I.X.indicator lights up.  
Folder number File number  
display  
display  
When a song is played back during Random (M.I.X.) play in the USB  
mode, the song can be played back again randomly even if not all  
songs on the USB Memory have been played back.  
Press VIEW to switch the display. See “Displaying the Text”  
(page 17) for information about display switching.  
Searching for CD Text  
Repeat Play  
On discs utilizing CD Text, songs can be searched and played by using  
their recorded titles. For discs without CD Text, searches are made  
using the track numbers associated with each song.  
Press  
played.  
4 to play back repeatedly the track being  
The track (file) will be played repeatedly.  
Press  
4 again and select off to deactivate repeat play.  
1
2
Press  
/ENT during play.  
This will set the search mode.  
CD mode :  
Turn the Rotary encoder to select the desired  
track, and then press  
/ENT.  
: Only a track is repeatedly played back.  
This will play the selected track.  
Press and hold  
/ESC for at least 2 seconds in the search mode to  
cancel. Or, the search mode is cancelled if no operation is performed  
for 10 seconds.  
When CD Text Search is made during M.I.X. play, the M.I.X. play  
mode will be cancelled.  
MP3/WMA/AAC mode :  
: Only a file is repeatedly played back.  
: Only files in a folder are repeatedly played back.  
12-EN  
 
     
File/Folder Name Search  
(concerning MP3/WMA/AAC)  
About MP3/WMA/AAC  
CAUTION  
Folder and file names may be searched and displayed during playback.  
Except for private use, duplicating audio data (including MP3/  
WMA/AAC data) or distributing, transferring, or copying it,  
whether for free or for a fee, without permission of the copyright  
holder is strictly prohibited by the Copyright Act and by  
international treaty.  
1
2
During MP3/WMA/AAC playback, press  
activate the search mode.  
/ENT to  
Turn the Rotary encoder to select Folder Name  
Search mode or File Name Search mode, and then  
What is MP3?  
press  
/ENT.  
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a  
compression standard prescribed by the ISO, the International  
Standardization Organization and MPEG which is a joint activity  
institution of the IEC.  
Folder Name Search mode  
MP3 files contain compressed audio data. MP3 encoding is  
capable of compressing audio data at extremely high ratios,  
reducing the size of music files to as much as one-tenth their  
original size. This is achieved while still maintaining near CD  
quality. The MP3 format realises such high compression ratios  
by eliminating the sounds that are either inaudible to the human  
ear or masked by other sounds.  
3
Turn the Rotary encoder to select the desired  
folder.  
4
Press and hold  
/ENT for at least 2 seconds to  
play back the first file in the selected folder.  
Press and hold /ESC for at least 2 seconds in the search mode to  
cancel. Or, the search mode is cancelled if no operation is performed  
for 10 seconds.  
What is WMA?  
To search for files in the Folder Name Search mode, press  
/ENT. Files in the folder may be searched.  
WMA, or “Windows Media™ Audio,” is compressed audio data.  
WMA is similar to MP3 audio data and can achieve CD quality  
sound with small file sizes.  
Press  
/ESC to exit Folder Name Search mode in step 3 in order  
to select File Name Search mode.  
The root folder of DISC is displayed as “  
When Folder Name Search is made during M.I.X. play, the M.I.X.  
play mode will be cancelled.  
”.  
What is AAC?  
AAC is the abbreviation for “Advanced Audio Coding,” and is a  
basic format of audio compression used by MPEG2 or MPEG4.  
File Name Search mode  
Method for creating MP3/WMA/AAC files  
3
4
Press  
or  
to select another Folder.  
Audio data is compressed using software with MP3/WMA/AAC  
codecs. For details on creating MP3/WMA/AAC files, refer to the  
users manual for that software.  
MP3/WMA/AAC files that are playable on this device have the  
file extensions “mp3”/“wma”/“m4a”. Files with no extension  
cannot be played back (WMA ver. 7.1 , 8 and 9 are supported).  
Protected files are not supported, neither are raw AAC files  
(using the “.aac” extension).  
Select the desired file by turning the Rotary  
encoder.  
5
Press  
/ENT to play back the selected file.  
/ESC for at least 2 seconds in the search mode to  
Press and hold  
cancel. Or, the search mode is cancelled if no operation is performed  
for 10 seconds.  
There are many different versions of the AAC format. Confirm  
that the software being used conforms to the acceptable  
formats listed above. Its possible that the format may be  
unplayable even though the extension is valid.  
Press  
/ESC in the search mode to return to the previous mode.  
When File Name Search is made during M.I.X. play, the M.I.X. play  
mode will be cancelled.  
Playback of AAC files encoded by iTunes is supported.  
Quick Search  
You can search for tracks (files).  
1
Press and hold  
CD/MP3/WMA/AAC mode to activate Quick Search  
/ENT for at least 2 seconds in the  
mode.  
2
Turn the Rotary encoder to select a desired track  
(file).  
The selected track is played back immediately.  
Press and hold  
/ESC for at least 2 seconds in the search mode to  
cancel. Or, the search mode is cancelled if no operation is performed  
for 10 seconds.  
13-EN  
 
       
Supported playback sampling rates and bit rates  
Order of files  
Files are played back in the order that the writing software writes  
MP3  
them to the disc. Therefore, the playback order may not be what  
is expected. Verify the writing order in the softwares  
documentation. The playback order of the folders and files is as  
follows.  
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,  
16 kHz, 12 kHz, 11.025 kHz, 8 kHz  
Bit rates:  
32 - 320 kbps  
WMA  
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz  
Bit rates:  
48 - 192 kbps  
Root folder  
AAC  
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,  
16 kHz, 12 kHz, 11.025 kHz, 8 kHz  
Bit rates:  
16 - 320 kbps  
This device may not play back correctly depending on sampling  
rates.  
In the USB mode, the playback time may not be correctly  
displayed when a VBR (Variable Bit Rate) recorded file is played  
back.  
ID3 tags/WMA tags  
This device supports ID3 tag v1 and v2, and WMA/AAC tag.  
If tag data is in an MP3/WMA/AAC file, this device can display  
the title (track title), artist name, and album name ID3 tag/WMA/  
AAC tag data.  
This device can only display single-byte alphanumeric  
characters (up to 30 for ID3 tags and up to 15 for WMA tags)  
and the underscore. For non-supported characters, “NO  
SUPPORT” is displayed.  
The tag information may not be correctly displayed, depending  
on the contents.  
Folder  
MP3/WMA/AAC File  
* The folder No./folder Name will not be displayed if no file is  
contained in the folder.  
Playing back MP3/WMA/AAC  
MP3/WMA/AAC files are prepared, then written to a CD-R,  
CD-RW using CD-R writing software or stored to a USB memory.  
A disc can hold up to 510 files/folders (including Root Folders),  
and the maximum number of folders is 255. This unit can  
recognize at least 100 folders (including root folder) and 100  
files per folder stored in USB memory.  
Terminology  
Bit rate  
This is the “sound” compression rate specified for encoding. The  
higher the bit rate, the higher the sound quality, but also the larger  
the files.  
Playback may not be performed if a disc or USB memory  
exceeds the limitations described above.  
Do not make a file’s playback time more than 1 hour.  
Sampling rate  
This value shows how many times per second the data is sampled  
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,  
so the sound is sampled (recorded) 44,100 times per second. The  
higher the sampling rate, the higher the sound quality, but also the  
larger the volume of data.  
Media supported  
The media that this device can play back are CD-ROMs, CD-Rs,  
and CD-RWs.  
This device also can play back USB memory media.  
Encoding  
Corresponding File Systems  
Converting music CDs, WAVE (AIFF) files, and other sound files into  
the specified audio compression format.  
This device supports discs formatted with ISO9660 Level 1 or  
Level 2.  
Tag  
Under the ISO9660 standard, there are some restrictions to  
remember.  
Song information such as track titles, artist names, album names,  
etc., written into MP3/WMA/AAC files.  
The maximum nested folder depth is 8 (including the root  
directory). The number of characters for a folder/file name is  
limited.  
Root folder  
Valid characters for folder/file names are letters A-Z (all caps),  
numbers 0-9, and ‘_’ (underscore).  
The root folder (or root directory) is found at the top of the file  
system. The root folder contains all folders and files. It is created  
automatically for all burned discs.  
This device also can play back discs in Joliet, Romeo, etc., and  
other standards that conform to ISO9660. However, sometimes  
the file names, folder names, etc., are not displayed correctly.  
This device also supports FAT 12/16/32 for USB memory device.  
Formats supported  
This device supports CD-ROM XA, Mixed Mode CD, Enhanced  
CD (CD-Extra) and Multi-Session.  
This device cannot correctly play back discs recorded with  
Track At Once or packet writing.  
14-EN  
 
   
1
* When the subwoofer mode is set to OFF, its level cannot be adjusted.  
The adjustment can also be made by pressing Rotary encoder  
(AUDIO). Refer to “Adjusting Subwoofer Level/Bass Level/Treble  
Level/Balance (Between Left and Right)/Fader (Between Front and  
Rear)/Defeat” (page 15).  
Sound Setting  
2
Rotary encoder (AUDIO/LOUD)  
BAND/TA  
/ENT  
SOURCE/  
* The function is inoperable when DEFEAT is set to ON.  
Setting the Bass Control  
You can change the Bass Frequency emphasis to create your own tonal  
preference.  
1
2
Press SOUND to activate the Sound Setting mode.  
Turn the Rotary encoder to select the BASS  
SOUND  
/ESC  
Adjustment mode, and then press  
/ENT.  
SUBW LEVEL*3  
BASS*4  
TREBLE*4  
HPF*4  
SUBW LEVEL  
Adjusting Subwoofer Level/Bass Level/  
Treble Level/Balance (Between Left and  
Right)/Fader (Between Front and Rear)/  
Defeat  
Setting the Bass Centre Frequency  
3-1 Press BAND/TA to select the desired bass centre  
frequency.  
1
Press Rotary encoder (AUDIO) repeatedly to  
choose the desired mode.  
80 Hz  
100 Hz  
200 Hz  
60 Hz  
80 Hz  
Emphasizes the displayed bass frequency ranges.  
Each press changes the mode as follows:  
Setting the Bass Bandwidth  
SUBW LEVEL*  
BALANCE  
BASS LEVEL  
DEFEAT  
TREBLE LEVEL  
VOLUME SUBW LEVEL  
FADER  
3-2 Press SOURCE/ to select the desired bass  
Subwoofer level : 0 ~ +15  
Bass level: –7 ~ +7  
Treble level: –7 ~ +7  
Balance : L15 ~ R15  
Fader : R15 ~ F15  
Defeat : ON/OFF  
bandwidth.  
Volume : 0 ~ 35  
If no operation is performed for 5 seconds after selecting the SUBW  
LEVEL, BASS LEVEL, TREBLE LEVEL, BALANCE, FADER or  
DEFEAT mode, the unit automatically returns to normal mode.  
Changes the boosted bass bandwidth to wide or narrow. A  
wider setting will boost a wide range of frequencies above  
and below the centre frequency. A narrower setting will  
boost only frequencies near the centre frequency.  
* When the subwoofer mode is set to OFF, its level cannot be adjusted.  
Refer to “Turning Subwoofer ON/OFF” (page 16).  
2
Turn the Rotary encoder until the desired sound is  
obtained in each mode.  
Setting the Bass Level  
By setting DEFEAT ON, previously adjusted settings of  
BASS and TREBLE will return to the factory defaults.  
5
3-3* Turn the Rotary encoder to select the desired  
bass level (–7~+7).  
You can emphasize or weaken the bass level.  
Setting the Subwoofer Level  
4
Press and hold  
return to normal mode.  
/ESC for at least 2 seconds to  
You can change the Subwoofer Level to create your own tonal  
preference.  
If no operation is performed for 15 seconds, the unit will return to  
normal mode automatically.  
1
2
Press SOUND to activate the Sound Setting mode.  
Turn the Rotary encoder to select the SUBW  
The bass level settings will be individually memorized for each  
source (FM, MW (LW), CD, etc.) until the setting is changed. The  
bass frequency and bass bandwidth settings adjusted for one source  
are effective for all other sources (FM, MW (LW), CD etc.).  
When subwoofer is set to OFF and DEFEAT is set to ON, pressing  
the SOUND button momentarily will not be functional.  
LEVEL Adjustment mode, and then press  
/ENT.  
SUBW LEVEL*1  
BASS*2  
TREBLE*2  
HPF*2  
SUBW LEVEL  
*3When the subwoofer mode is set to OFF, its level cannot be adjusted.  
Refer to “Turning Subwoofer ON/OFF” (page 16).  
3
Turn the Rotary encoder to select the desired  
subwoofer level (0~+15).  
4
* The function is inoperable when DEFEAT is set to ON.  
5
* The adjustment can also be made by pressing Rotary encoder  
If no operation is performed for 15 seconds, the unit will return to  
normal mode automatically.  
When subwoofer is set to OFF and DEFEAT is set to ON, pressing  
the SOUND button momentarily will not be functional.  
(AUDIO). Refer to “Adjusting Subwoofer Level/Bass Level/Treble  
Level/Balance (Between Left and Right)/Fader (Between Front and  
Rear)/Defeat” (page 15).  
15-EN  
 
       
9
*
*
When the subwoofer mode is set to OFF, its level cannot be  
adjusted. Refer to “Turning Subwoofer ON/OFF” (page 16).  
The function is inoperable when DEFEAT is set to ON.  
Setting the Treble Control  
10  
You can change the Treble Frequency emphasis to create your own tonal  
preference.  
Turning Subwoofer ON/OFF  
1
2
Press SOUND to activate the Sound Setting mode.  
Turn the Rotary encoder to select the TREBLE  
When the subwoofer is on, you can adjust the subwoofer output level  
(refer to page 15).  
Adjustment mode, and then press  
/ENT.  
HPF*7  
SUBW LEVEL*6  
BASS*7  
TREBLE*7  
1
2
Press and hold SOUND for at least 2 seconds to  
activate the Subwoofer selection mode.  
SUBW LEVEL  
Setting the Treble Centre Frequency  
Turn the Rotary encoder to select the  
SUBWOOFER mode, and then press  
/ENT.  
3-1 Press BAND/TA to select the desired treble centre  
SUBWOOFER SUBW SYSTEM SUBWOOFER  
frequency.  
10.0 kHz  
12.5 kHz  
15.0 kHz  
17.5 kHz  
10.0 kHz  
3
Turn the Rotary encoder to select SUBW ON/OFF.  
SUBW ON (Initial Setting) SUBW OFF  
Emphasizes the displayed treble frequency ranges.  
4
Press and hold  
return to normal mode.  
/ESC for at least 2 seconds to  
Setting the Treble Level  
8
3-2* Turn the Rotary encoder to select the desired  
If no operation is performed for 15 seconds, the unit will return to  
normal mode automatically.  
treble level (–7~+7).  
You can emphasize the treble level.  
4
Press and hold  
return to normal mode.  
/ESC for at least 2 seconds to  
Setting the Subwoofer System  
If no operation is performed for 15 seconds, the unit will return to  
normal mode automatically.  
The treble level settings will be individually memorized for each  
source (FM, MW (LW), CD, etc.) until the setting is changed. The  
Treble frequency settings adjusted for one source are effective for all  
other sources (FM, MW (LW), CD, etc.).  
When the subwoofer is on, you can select either SYS 1 or SYS 2 for the  
desired subwoofer effect.  
1
2
Press and hold SOUND for at least 2 seconds to  
activate the Subwoofer selection mode.  
When subwoofer is set to OFF and DEFEAT is set to ON, pressing  
the SOUND button momentarily will not be functional.  
Turn the Rotary encoder to select the SUBW  
6
* When the subwoofer mode is set to OFF, its level cannot be adjusted.  
Refer to “Turning Subwoofer ON/OFF” (page 16).  
SYSTEM mode, and then press  
/ENT.  
7
SUBWOOFER SUBW SYSTEM  
SUBWOOFER  
* The function is inoperable when DEFEAT is set to ON.  
8
* The adjustment can also be made by pressing Rotary encoder  
3
Turn the Rotary encoder to select SUBW SYS 1 or  
SUBW SYS 2, and then press /ENT.  
(AUDIO). Refer to “Adjusting Subwoofer Level/Bass Level/Treble  
Level/Balance (Between Left and Right)/Fader (Between Front and  
Rear)/Defeat” (page 15).  
Select either SYS 1 or SYS 2 for the desired subwoofer  
effect.  
SUBW SYS 1 (Initial Setting)  
SUBW SYS 2  
Adjusting the High Pass Filter  
SUBW SYS 1: Subwoofer level changes according to the  
main volume setting.  
SUBW SYS 2 : Subwoofer level changes is different from the  
main volume setting. For example, even at low  
The High Pass Filter on this unit can be adjusted to suit your personal  
taste.  
1
2
Press SOUND to activate the Sound Setting mode.  
Turn the Rotary encoder to select the HPF  
volume settings, the subwoofer is still audible.  
4
Press and hold  
/ESC for at least 2 seconds to  
Adjustment mode, and then press  
/ENT.  
return to normal mode.  
SUBW LEVEL*9  
SUBW LEVEL  
BASS*10  
TREBLE*10 HPF*10  
If no operation is performed for 15 seconds, the unit will return to  
normal mode automatically.  
This function is inoperable when Subwoofer mode is set to OFF.  
3
4
Turn the Rotary encoder to select the desired HPF  
frequency.  
Turning Loudness On/Off  
OFF  
80 Hz  
120 Hz  
160 Hz  
Loudness introduces a special low- and high-frequency emphasis at low  
listening levels. This compensates for the ear’s decreased sensitivity to  
bass and treble sound.  
Press and hold  
return to normal mode.  
/ESC for at least 2 seconds to  
If no operation is performed for 15 seconds, the unit will return to  
normal mode automatically.  
When subwoofer is set to OFF and DEFEAT is set to ON, pressing  
the SOUND button momentarily will not be functional.  
Press and hold Rotary encoder (LOUD) for at least 2  
seconds to activate or deactivate the loudness mode.  
The function is inoperable when DEFEAT is set to ON.  
16-EN  
 
         
About the indication display  
When displaying Text, the following indicators are lit  
according to the mode.  
Other Functions  
VIEW  
Blinks in search mode when the Rotary encoder is turned. Also  
blinks when operation, such as fast forward etc., is performed.  
Displaying the Text  
Lights up in SETUP mode or SOUND setting menu mode.  
Text information, such as the disc name and the track name, will be  
displayed if playing a CD text compatible disc. It is also possible to  
display the folder name, the file name and the tag, etc., while playing  
MP3/WMA/AAC files.  
MP3/WMA/AAC/  
USB Audio  
Mode  
Indicator/  
Mode  
iPod/BT Audio  
Mode  
CD Mode  
2
Folder Name*  
Press VIEW.  
The display will change every time the button is pressed.  
––  
––  
––  
being displayed  
When the TEXT SCROLL is set to SCROLL MANU, press and hold  
VIEW for at least 2 seconds, the current text will be scrolled one  
time (except Radio mode).  
1
1
Artist Name*  
Artist Name*  
being displayed being displayed  
1
1
The display in Radio mode:  
If there is PS (Programme Service Name)  
Text (Disc  
Album Name* Album Name*  
3
Name* ) being being displayed being displayed  
displayed  
PS (Programme Service Name)*1  
RADIO TEXT  
PS (Programme Service Name)  
1
1
Text (Track  
Song Name* / Song Name*  
Name* ) being File Name being being displayed  
displayed displayed  
If there is no PS (Programme Service Name)  
3
FREQUENCY  
RADIO TEXT FREQUENCY  
The display in CD mode:  
TRACK NO./ELAPSED TIME  
TEXT (TRACK NAME)*2  
1
* Tag information  
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is  
displayed.  
TEXT (DISC NAME)*2  
TRACK NO./ELAPSED TIME  
2
The display in MP3/WMA/AAC mode:  
FILE NO./ELAPSED TIME FOLDER NO./FILE NO.  
FILE NAME  
ARTIST NAME*3  
SONG NAME*3  
* The root folder of Disc is displayed as “FOLDER”, the root folder of  
USB is displayed as “ROOT”.  
3
FOLDER NAME  
* If there is no Text (Disc Name or Track Name), “DISC TEXT”/  
ALBUM NAME*3  
“TRACK TEXT” is displayed.  
FILE NO./ELAPSED TIME  
About “Text”  
The display in BT AUDIO mode:  
The following display will be shown only when a telephone with  
iRadio function is correctly connected with a Bluetooth Interface  
Module and correctly set. (For details, refer to the Owner’s  
Manual of the Bluetooth Interface Module).  
Text:  
Text compatible CDs contain text information such as the disc  
name and track name. Such text information is referred to as  
“text.”  
PRESET NO.  
ARTIST NAME*4  
PRESET NO.  
ALBUM NAME*4  
Some characters may not be displayed correctly with this device,  
depending on the character type.  
The text or tag information may not be correctly displayed,  
depending on the contents.  
SONG NAME*4  
1
* Press and hold VIEW for at least 2 seconds in the PS display mode,  
frequency will be displayed for 5 seconds.  
* Displayed during playback of a disc with CD text.  
* ID3 tag/WMA tag  
2
3
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,  
the ID3 tag/WMA tag information is displayed (e.g., song name,  
artist name, and album name). All other tag data is ignored.  
If the Scroll Setting (page 19) is set to “SCROLL AUTO”, the tag  
information will scroll automatically.  
4
* When a BT AUDIO signal is received, text information such as artist,  
album, song is displayed.  
If there is no text information, “ARTIST”/ “ALBUM”/ “SONG” will  
be displayed.  
17-EN  
 
   
BLUETOOTH IN  
SETUP  
Setting the Bluetooth Connection  
BT IN ADAPTE / BT IN OFF (Initial setting)  
You can flexibly customize the unit to suit your own preferences and  
usage. From the SETUP menu, Sound Customizing, Visual  
Customizing, etc., can be modified.  
If an optional Bluetooth Box is connected, you can place a hands-free  
call by a Bluetooth-equipped mobile phone.  
Make this setting when the Bluetooth Box is connected and the  
Bluetooth function is used. For details, refer to the Owner’s Manual of  
the optional Bluetooth Box.  
Rotary encoder  
SOURCE/  
/ENT  
Set ADAPTE when the Bluetooth Box is connected.  
If the Bluetooth Box compatible with the Voice Dial function is  
connected, the Voice Dial function can be used.  
Sound Customizing  
/ESC F/SETUP  
Adjusting Source Signal Levels  
FM-LEVEL HI (Initial setting) / FM-LEVEL LOW  
Use steps 1 to 4 to select one of the SETUP modes to  
modify. See the applicable section below for details  
about the selected SETUP item.  
If the difference in volume level between the CD player and FM radio is  
too great, adjust the FM signal level.  
Visual Customizing  
1
2
Press and hold F/SETUP for at least 2 seconds to  
activate the SETUP mode.  
Changing Lighting Colour  
ILLUMI TYPE1 (initial setting) / ILLUMI TYPE2  
Turn the Rotary encoder to select the desired  
TYPE1  
TYPE2  
SETUP menu, and then press  
/ENT.  
(e.g. Select POWER IC)  
CDE-9880R:  
You can change the lighting colour of the unit’s buttons.  
BLUETOOTH IN*1  
FM-LEVEL  
RDS REGIONAL*2  
ILLUMINATION  
PLAY MODE  
PI SEEK*3 ALERT PTY31*4  
TYPE1: The colour of the unit’s buttons is green.  
TYPE2: The colour of the unit’s buttons is amber  
LCD CONTRAST  
SCROLL TYPE  
AUX+ SETUP  
DIMMER  
TEXT SCROLL  
INT MUTE*5  
AUX+ NAME*6  
AUX IN GAIN*6  
CDE-9882Ri:  
You can change the lighting colour of the following six buttons.  
SOURCE/ , BAND/TA,  
POWER IC  
LANGUAGE  
DEMO  
BLUETOOTH IN  
,
,
,
.
1
* Displayed only when INT MUTE is set to OFF, and the mode is set to  
other than BT AUDIO.  
* Refer to “Receiving RDS Regional (Local) Stations” (page 9).  
* Refer to “PI SEEK Setting” (page 10).  
* Refer to “Setting PTY31 (Emergency Broadcast) reception”  
TYPE1: When the colour of the six buttons is blue, the colour of  
the other is red.  
TYPE2: When the colour of the six buttons is red, the colour of  
2
3
4
the other is red.  
(page 10).  
5
* Displayed only when BLUETOOTH IN is OFF.  
* Displayed only when AUX+ SETUP is ON.  
Adjusting Display Contrast  
CONTRAST  
6
3
4
Turn the Rotary encoder to change the setting.  
(e.g. Select POWER IC ON or POWER IC OFF.)  
You can adjust the display contrast for better visibility.  
You can adjust in a range of –5 and +3.  
Press and hold F/SETUP for at least 2 seconds to  
return to normal mode.  
The initial setting at the factory is “0”.  
Press  
/ESC to return to the previous mode.  
If no operation is performed for 60 seconds, the unit will return to  
normal mode automatically.  
18-EN  
 
               
Dimmer Control  
DIMMER AUTO (Initial setting) / DIMMER MANU  
MP3/WMA/AAC  
Set the DIMMER control to AUTO to decrease the illumination  
brightness of the unit with the head lights of the vehicle ON. This mode  
is useful if you feel the unit’s backlighting is too bright at night.  
Playing MP3/WMA/AAC Data (PLAY MODE)  
CD-DA (Initial setting) / CD-DA&MP3  
This unit can play back CDs containing both CD and MP3/WMA/AAC  
data (created in Enhanced CD (CD Extra) format). However, in some  
situations, playback of an enhanced CD may be difficult. In this case,  
you can select playback of a single session only, containing the CD data.  
When a disc contains both CD and MP3/WMA/AAC data, playback  
starts from the CD data portion of the disc.  
If your vehicle should have a dimmer control for the dashboardlights,  
never connect the DIMMER cable (orange) of the radio to this  
dimmer control.  
Scroll Type Setting  
SCROLL TYPE1 / SCROLL TYPE2 (Initial setting)  
CD-DA :  
Only the CD data in Session 1 can be played  
back.  
Choose from two scrolling methods.  
Select the type you prefer.  
CD-DA&MP3 : CD data, MP3/WMA/AAC files in mixed mode,  
SCROLL TYPE1: The characters scroll from right to left, a single  
and multi-session discs can be played back.  
character at a time.  
Perform this setting before inserting a disc. If a disc has already been  
inserted, remove it first.  
SCROLL TYPE2: Words are built up from left to right, a single  
character at a time. When the display is filled,  
it is cleared and the remaining words are  
displayed the same way until all words of the  
title have been shown.  
External Device  
Connecting to an External Amplifier  
POWER IC ON (Initial setting) / POWER IC OFF  
Scroll Setting (TEXT SCROLL)  
SCROLL AUTO / SCROLL MANU (Initial setting)  
When an external amplifier is connected, sound quality can be improved  
by stopping the power supply of the built-in amplifier.  
This CD player can scroll the disc and track names recorded on  
CD-TEXT discs, as well as the text information of MP3/WMA/AAC  
files, folder names and tags.  
POWER IC OFF : Use this mode when the line output of this unit  
is used to drive an external amplifier. In this  
setting, the head unit’s internal amplifier is  
SCROLL AUTO: The CD text information, the text information of  
folder and file names, and the tags are  
scrolled automatically.  
turned OFF and cannot drive speakers.  
SCROLL MANU: The display is scrolled when a disc is loaded  
Front  
left  
or when a track is changed, etc.  
Amplifier  
The unit scrolls CD text names, folder names, file names or tag  
display.  
Front  
right  
Rear  
left  
Setting the Language Font  
LANGUAGE 1 (initial setting) / LANGUAGE 2 / LANGUAGE 3  
Amplifier  
Rear  
right  
Three types of font can be selected.  
LANGUAGE 1: Normal font  
LANGUAGE 2: European font  
LANGUAGE 3: Russian font  
Demonstration  
DEMO ON / DEMO OFF (Initial setting)  
This unit has a demonstration feature for the display.  
To quit Demo mode, set to DEMO OFF.  
19-EN  
 
                 
POWER IC ON : The speakers are driven by the built-in  
amplifier.  
USB memory (Optional)  
Speakers  
SPEAKER  
RIGHT FRONT  
/
SOURCE/  
Front  
right  
SPEAKER  
RIGHT REAR  
Rear  
right  
SPEAKER  
LEFT REAR  
Rear  
Controlling USB memory (Optional)  
left  
A USB memory may be connected to this unit. With a USB memory  
connected to this unit, the USB memory will be controllable from this  
unit.  
SPEAKER  
LEFT FRONT  
Front  
left  
The controls on this unit for USB memory operation are operative  
only when a USB memory is connected.  
No sound is produced by the system when the power output is set to  
OFF.  
Playing MP3/WMA/AAC Files with the  
USB memory (Optional)  
Turning Mute Mode On/Off (INT MUTE)  
MUTE ON / MUTE OFF (Initial setting)  
If a device having the interrupt feature is connected, audio will be  
automatically muted whenever the interrupt signal is received from the  
device.  
If you connect a USB memory containing MP3/WMA/AAC, you can  
play these files on this unit.  
1
Press SOURCE/ to switch to the USB AUDIO  
mode.  
The mode will change every time the button is pressed.  
Setting the AUX+ SETUP Mode  
AUX+ ON / AUX+ OFF (Initial setting)  
An external device (such as a portable music player) can be connected  
to the iPod Direct connector of this unit. An iPod Direct/RCA Interface  
cable (optional) is required.  
A portable music device and an iPod cannot be connected to the iPod  
Direct connector at the same time.  
TUNER  
DISC  
USB AUDIO  
iPod*1/AUX+*2  
BT AUDIO*3  
TUNER  
1
* Displayed only when the iPod is connected and AUX+ SETUP is set  
to OFF, refer to “Setting the AUX+ SETUP Mode” (page 20).  
2
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting  
AUX+ ON : Set to ON when a portable device is connected. If  
SOURCE/ is pressed and AUX+ is selected, the  
sound of the portable device is input to the unit.  
the AUX+ SETUP Mode” (page 20).  
3
* Only when BLUETOOTH IN is set to ADAPTE, refer to “Setting the  
Bluetooth Connection” (page 18).  
AUX+ OFF :Set to OFF when an iPod is connected.  
2
To pause playback, press  
/
.
Setting the AUX+ NAME mode  
AUXILIARY* (Initial setting) / TV / DVD / PORTABLE / GAME  
Pressing again will resume the playback.  
/
The root folder is displayed as “ROOT” in the Folder Name Search  
mode.  
You can change the AUX+ NAME display in the SETUP mode, when  
AUX+ SETUP is ON.  
This unit plays back files on a USB memory device with the same  
controls and modes as playback of CDs containing MP3/WMA/AAC.  
For details, refer to “CD/MP3/WMA/AAC” on pages 11 to 14.  
Before disconnecting USB memory, be sure to change to another  
source or set to pause.  
* After the setting is completed, AUX is displayed on the unit.  
Setting the AUX+ Level (AUX IN GAIN)  
LOW (Initial setting) / HIGH  
The playback time may not be correctly displayed when a VBR  
(Variable Bit Rate) recorded file is played back.  
After setting to ON in “Setting the AUX+ SETUP Mode”, this setting  
can be carried out.  
LOW: Decreases the external input audio level.  
HIGH: Increases the external input audio level.  
20-EN  
 
               
Advance to the beginning of the next song:  
Press  
iPod® (Optional)  
.
Fast forward through current song:  
Press and hold  
.
/
SOURCE/  
3
To pause playback, press  
/
.
/ENT  
4 5  
Rotary encoder  
6
Pressing again will resume playback.  
/
A song playing on the iPod while it is connected to this unit will  
continue to play from where it was paused after disconnection.  
If you listen to an episode from a selected podcast or audiobook, the  
episode can be changed by pressing  
An episode may have several chapters. The chapter can be changed  
by pressing or  
or  
.
.
Preset buttons  
(1 through 6)  
VIEW  
/ESC  
Searching for a desired Song  
®
An iPod can be connected to this unit by using the proprietary  
ALPINE FULL SPEED™ Connection Cable (KCE-422i) (sold  
separately). When this unit is connected by using the cable, the controls  
on the iPod are not functional.  
An iPod can contain hundreds of songs. By using file tag information  
and keeping these songs organised in playlists, this unit’s search  
functions will ease song searches. Each music category has its own  
individual hierarchy. Use the Playlist/Artist/Album/Song/ Podcast/  
Genre/Composer/Audiobook search mode to narrow searches based on  
the table below.  
Set AUX+ SETUP to OFF when an iPod is connected (refer to  
“Setting the AUX+ SETUP Mode” on page 20).  
If the Bluetooth Box and an iPod are connected at the same time, be  
sure to disconnect the iPod from the Bluetooth Box while turning  
ACC to OFF.  
Hierarchy 1  
Playlist  
Hierarchy 2  
Song  
Hierarchy 3  
Hierarchy 4  
Song  
Artist*  
Album*  
Song  
iPods usable with this unit  
Album*  
The unit can be used with the fourth generation and above  
iPod, iPod photo, iPod mini or iPod nano. iPod Shuffle cannot  
be used, however.  
Touch wheel or scroll wheel type iPods without the dock  
connector cannot be connected to the unit.  
The unit can be used with the following iPod.  
Song  
Podcast  
Genre*  
Episode  
Artist*  
Album*  
Album*  
Song  
Song  
Composer*  
Audiobook  
Fourth generation iPod  
Fifth generation iPod  
iPod photo  
iPod mini  
First generation iPod nano  
Second generation iPod nano  
For example: Searching by Artist name  
The following example explains how an ARTIST search is performed.  
Another search mode can be used for the same operation, although the  
hierarchy differs.  
1
2
Press  
/ENT to activate the search selection mode.  
If the unit is used with iPod software versions of iTunes earlier than  
7.1.0.59, correct function and performance are not guaranteed.  
Turn the Rotary encoder to select the ARTIST  
search mode, and then press  
/ENT.  
PLAYLIST  
GENRE  
ARTIST  
COMPOSER  
ALBUM  
SONG  
PODCAST  
PLAYLIST  
Playback  
AUDIOBOOK  
3
4
Turn the Rotary encoder to select the desired  
Artist, and then press /ENT.  
1
Press SOURCE/ to switch to the iPod mode.  
The mode will change every time the button is pressed.  
TUNER DISC USB AUDIO  
iPod*1/AUX+*2  
Turn the Rotary encoder to select the desired  
Album, and then press /ENT.  
BT AUDIO*3  
TUNER  
1
* Displayed only when the iPod is connected and AUX+ SETUP is set  
to OFF, refer to “Setting the AUX+ SETUP Mode” (page 20).  
2
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting  
the AUX+ SETUP Mode” (page 20).  
* Only when BLUETOOTH IN is set to ADAPTE, refer to “Setting the  
3
Bluetooth Connection” (page 18).  
2
Press  
Return to the beginning of the current song:  
Press  
Fast backward through current song:  
Press and hold  
or  
to select the desired song.  
.
.
21-EN  
 
     
5
Turn the Rotary encoder to select the desired  
Song, and then press /ENT.  
The selected song is played back.  
Direct Search Function  
The unit’s direct search function can be used to search for an album,  
song, etc., more efficiently. In Playlist/Artist/Album/Song/Podcast/  
Genre/Composer/Audiobook mode, you can quickly target any song.  
After pressing and holding  
each hierarchy (except Song and Audiobook hierarchy), all songs of  
the selected hierarchy are played back.  
After selecting [ALL] in the search mode with “*”, press and hold  
/ENT for at least 2 seconds to play back all songs in the iPod or  
selected search mode.  
While in the search mode, if you press and hold  
seconds, or no operation is performed for 10 seconds, the search  
mode is cancelled.  
In the search mode, pressing  
mode.  
When search is made during M.I.X. play, the M.I.X. play mode will be  
cancelled.  
“NO SONG” will be displayed if there are no songs in the selected  
playlist in the PLAYLIST search mode.  
“NO PODCAST” will be displayed if there is no podcast data in the  
iPod in the PODCAST search mode.  
“NO AUDIOBOOK” will be displayed if there is no audiobook data  
in the iPod in the AUDIOBOOK search mode.  
If “iPod name” stored in the iPod is selected in the desired Playlist  
/ENT for at least 2 seconds while in  
In the search mode, press any one of the preset  
buttons (1 through 6) to quickly skip over a  
designated percent of your song content.  
Song search example:  
If there are 100 songs in your iPod, they are divided into 6  
groups using percentages (shown below). These groups are  
assigned to the preset buttons (1 through 6).  
/ESC for 2  
/ESC will return to the previous  
Example 1:  
Suppose the song you are searching for is located at around  
the middle (50%) of your library: press button 4 to jump to the  
50th song and turn the Rotary encoder to find the desired  
song.  
Example 2:  
Suppose the song you are searching for is located near the  
end (83%) of your library: press button 6 to jump to the 83rd  
song and turn the Rotary encoder to find the desired song.  
search mode, and  
in the iPod. Also, if you press and hold  
/ENT is pressed, you can search for all songs  
/ENT for at least 2  
seconds, all songs in the iPod are played back.  
Depending on the iPod, podcast search is not supported.  
If any one of the preset buttons (1 through 6) is pressed in the search  
mode, a search can be made quickly by skipping to the specified  
location. For details, refer to “Direct Search Function” on page 22.  
All 100 songs (100%)  
0%  
1
17%  
33%  
50%  
67%  
83%  
6
Preset  
buttons  
2
3
4
5
First  
song  
17th  
song  
33rd  
song  
50th  
song  
67th  
song  
83rd  
song  
Songs  
Quick Search  
You can search a song from all songs in the iPod without selecting an  
album, artist, etc.  
Select Playlist/Artist/Album/Genre/  
Composer  
1
Press and hold  
activate the Quick Search mode.  
/ENT for at least 2 seconds to  
Playlist/Artist/Album/Genre/Composer can be easily changed.  
For example, if you listen to a song from a selected album, the album  
can be changed.  
2
Turn the Rotary encoder to select a desired song.  
The selected song is played back immediately.  
Press  
or  
to select the desired Playlist/Artist/Album/  
Press and hold  
/ESC for at least 2 seconds in the search mode to  
Genre/Composer.  
cancel. Or, the search mode is cancelled if no operation is performed  
for 10 seconds.  
If the song search mode was used to select a song, this function is  
inactive.  
If an album is selected during an artist search, other albums by that  
artist are searchable.  
If many songs are in the iPod, it takes time to search for songs.  
If any one of the preset buttons (1 through 6) is pressed in the search  
mode, a search can be made quickly by skipping to the specified  
location. For details, refer to “Direct Search Function” on page 22.  
This function is inactive during repeat (RPT) playback.  
This function is inactive during shuffle (M.I.X.) playback.  
22-EN  
 
     
Random Play Shuffle (M.I.X.)  
Repeat Play  
The Shuffle function of the iPod is displayed as M.I.X. on this unit.  
Only Repeat One is available for the iPod.  
Shuffle Albums:  
Repeat One:  
The songs on each album are played back in proper order.  
Upon completion of all the songs on the album, the next album is  
selected randomly. This continues until all albums have been  
played.  
A single song is repeatedly played back.  
1
Press  
4.  
The song is played back repeatedly.  
RPT  
(Repeat One)  
(off)  
RPT  
Shuffle Songs:  
Song shuffle randomly plays back songs within a selected  
category (playlist, album, etc.). The songs within the category  
are played just once until all songs have been played.  
2
To cancel repeat play, select (off) with the above  
procedure.  
1
Press 5  
.
During repeat playback, no other songs are selectable by pressing  
The songs are played back in random sequence.  
or  
.
M.I.X. M.I.X. (off)  
(Shuffle Albums) (Shuffle Songs)  
M.I.X.  
Displaying the Text  
2
To cancel M.I.X. play, select (off) with the above  
procedure.  
You can display the tag information of a song in the iPod.  
If a song is selected in the album search mode before selecting M.I.X.  
play, the songs will not play back randomly even when Shuffle  
Albums is selected.  
Press VIEW.  
Each press changes the display.  
When the TEXT SCROLL is set to MANU, press and hold VIEW for  
at least 2 seconds, the current text will be scrolled one time.  
Shuffle ALL:  
Shuffle ALL plays all songs in the iPod randomly. Any one song  
does not play back again until all songs have been played back.  
TRACK NO./ELAPSED TIME  
ARTIST NAME*  
ALBUM NAME*  
SONG NAME*  
TRACK NO./ELAPSED TIME  
1
Press 6.  
The songs are played back in random sequence.  
* TAG information  
M.I.X.  
(Shuffle ALL)  
(off)  
M.I.X.  
“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag  
information.  
Only alphanumeric characters (ASCII) can be displayed.  
If the artist, album or song name, created in iTunes, has too many  
characters, songs may not be played back when connected to the  
adapter. Therefore, a maximum of 250 characters is recommended.  
The maximum number of characters for the head unit is 128  
(128 byte).  
2
To cancel M.I.X. play, select (off) with the above  
procedure.  
If Shuffle ALL is selected, the selected songs being played back in the  
search mode are cancelled.  
Some characters may not be correctly displayed.  
“NO SUPPORT” is displayed if text information is not supported by  
the unit.  
23-EN  
 
     
CD insertion not possible.  
A CD is already in the CD player.  
- Eject the CD and remove it.  
The CD is being improperly inserted.  
- Make sure the CD is being inserted following instructions in  
the CD Player Operation section.  
Information  
In Case of Difficulty  
Unable to fast forward or backward the CD.  
If you encounter a problem, please turn the power off, then on again. If  
the unit is still not functioning normally, please review the items in the  
following checklist. This guide will help you isolate the problem if the  
unit is at fault. Otherwise, make sure the rest of your system is properly  
connected or consult your authorized Alpine dealer.  
The CD has been damaged.  
- Eject the CD and discard it; using a damaged CD in your unit  
can cause damage to the mechanism.  
CD playback sound skips due to vibration.  
Improper mounting of the unit.  
- Securely re-mount the unit.  
The disc is very dirty.  
- Clean the disc.  
The disc has scratches.  
- Change the disc.  
The pick-up lens is dirty.  
- Do not use a commercially available lens cleaner disc. Consult  
your nearest Alpine dealer.  
Basic  
No function or display.  
Vehicle’s ignition is off.  
- If connected following instructions, the unit will not operate  
with the vehicle’s ignition off.  
Improper power lead (Red) and battery lead (Yellow)  
connections.  
- Check power lead and battery lead connections.  
Blown fuse.  
- Check the fuse of the unit; replace with the proper value if  
necessary.  
Internal micro-computer malfunctioned due to interference noise  
CD playback sound skips without vibration.  
The disc is dirty or scratched.  
- Clean the disc; damaged disc should be replaced.  
Error displays (built-in CD player only).  
etc.  
Mechanical error.  
- Press the RESET switch with a ballpoint pen or other pointed  
article.  
- Press . After the error indication disappears, insert the disc  
again. If the above-mentioned solution does not solve the  
problem, consult your nearest Alpine dealer.  
Radio  
CD-R/CD-RW playback not possible.  
Unable to receive stations.  
Close session (finalization) has not been performed.  
- Perform finalization and attempt playback again.  
No antenna or open connection in cable.  
- Make sure the antenna is properly connected;  
replace the antenna or cable if necessary.  
MP3/WMA/AAC  
Unable to tune stations in the seek mode.  
MP3, WMA or AAC is not played back.  
You are in a weak signal area.  
Writing error occurred. The MP3/WMA/AAC format is not  
- Make sure the tuner is in the DX mode.  
compatible.  
If the area you are in is a primary signal area, the antenna may  
not be grounded and connected properly.  
- Make sure the MP3/WMA/AAC has been written in a  
supported format. Refer to “About MP3/WMA/AAC”  
(pages 13-14), then rewrite in the format supported by this  
device.  
- Check your antenna connections; make sure the antenna is  
properly grounded at its mounting location.  
The antenna may not be the proper length.  
- Make sure the antenna is fully extended; if broken, replace the  
antenna with a new one.  
Audio  
The sound is not output from the speakers.  
Broadcast is noisy.  
Unit has no output signal of the internal amplifier.  
- POWER IC is switched to “ON” (page 19).  
The antenna is not the proper length.  
- Extend the antenna fully; replace it if it is broken.  
The antenna is poorly grounded.  
iPod  
- Make sure the antenna is grounded properly at its mounting  
location.  
iPod does not play and no sound is output.  
The iPod has not been recognized.  
- Reset this unit and the iPod. Refer to “Initial System Start-Up”  
(page 7). To reset the iPod, refer to the Owner’s Manual of the  
iPod.  
CD  
CD Player not functioning.  
Out of operating temperature range +50°C (+120°F) for CD.  
- Allow the vehicle’s interior (or trunk) temperature to cool.  
CD playback sound is wavering.  
Moisture condensation in the CD Module.  
- Allow enough time for the condensation to evaporate (about 1  
hour).  
24-EN  
 
   
Indication for CD Player  
NO USB UNIT  
A USB memory is not connected.  
- Make sure the USB memory device is correctly connected and  
the cable is not excessively bent.  
No CD is inserted.  
- Insert a CD.  
Although a disc is inserted, “NO DISC” is displayed and the unit  
does not start to play or eject the disc.  
- Remove the disc by following these steps:  
No song (file) is stored in the USB memory.  
- Connect the USB memory device after storing songs (files).  
Press the  
button again for at least 2 seconds.  
If the disc still does not eject, consult your Alpine dealer.  
A sampling rate/bit rate not supported by the unit is used.  
- Use a sampling rate/bit rate that is supported by the unit.  
Mechanism error.  
1) Press the button and eject the CD.  
If not ejecting, consult your Alpine dealer.  
2) When the error indication remains after ejecting, press the  
button again.  
If the error indication still does not turn off after pressing the  
button for a few times, consult your Alpine dealer.  
A copy-protected WMA file was played back.  
- You can only play back non-copy-protected files.  
When “ERROR” is displayed:  
If the disc cannot be ejected by pressing , press the RESET switch  
(refer to page 7) and press  
If the disc still cannot be ejected, consult your Alpine dealer.  
NO SUPPORT  
again.  
Text information that is not recognizable by the unit has been  
input.  
- Use a USB memory device with input text information that is  
supported by the unit.  
A copy-protected WMA file was played back.  
- You can only play back non-copy-protected files.  
Indication for iPod Mode  
A sampling rate/bit rate not supported by the unit is used.  
- Use a sampling rate/bit rate that is supported by the unit.  
The iPod is not connected.  
- Make sure the iPod is correctly connected (refer to  
“Connections”).  
Make sure the cable is not bent excessively.  
Indication for USB memory  
Abnormal current is run to the USB connector device (an error  
message may be displayed if the USB device that is not  
compatible with the unit is connected).  
USB memory is a malfunction or it is shorted.  
- Connect another USB memory.  
There are no songs in the iPod.  
- Download songs to the iPod and connect to this unit.  
Communication error  
- Turn the ignition key off, and then set to ON again.  
- Check the display by reconnecting between the iPod and this  
unit, using the iPod cable.  
DEVICE ERROR  
A USB device that is not supported by the unit is connected.  
- Connect a USB device that is supported by the unit.  
Caused by the iPod Software Version not being compatible with  
this unit.  
- Update the iPod Software Version to be compatible with this  
unit.  
25-EN  
 
CHASSIS SIZE  
Specifications  
Width  
Height  
Depth  
178 mm (7")  
50 mm (2")  
FM TUNER SECTION  
160 mm (6-1/4")  
Tuning Range  
87.5-108.0 MHz  
0.7 µV  
NOSEPIECE SIZE  
Mono Usable Sensitivity  
Alternate Channel Selectivity  
Signal-to-Noise Ratio  
Stereo Separation  
80 dB  
Width  
Height  
Depth  
170 mm (6-3/4")  
46 mm (1-13/16")  
24 mm (15/16")  
65 dB  
35 dB  
Capture Ratio  
2.0 dB  
Due to continuous product improvement, specifications and design  
are subject to change without notice.  
MW TUNER SECTION  
Tuning Range  
531-1,602 kHz  
25.1 µV/28 dB  
Sensitivity (IEC Standard)  
LW TUNER SECTION  
CAUTION  
Tuning Range  
153-281 kHz  
Sensitivity (IEC Standard)  
31.6 µV/30 dB  
CD PLAYER SECTION  
CLASS 1  
LASER PRODUCT  
Frequency Response  
Wow & Flutter (% WRMS)  
Total Harmonic Distortion  
Dynamic Range  
5-20,000 Hz ( 1 dB)  
Below measurable limits  
0.008% (at 1 kHz)  
95 dB (at 1 kHz)  
105 dB  
(Bottom side of player)  
Signal-to-Noise Ratio  
Channel Separation  
85 dB (at 1 kHz)  
PICKUP  
Wave length  
Laser power  
795 nm  
CLASS I  
USB SECTION  
USB requirements  
Max. Power Consumption  
USB Class  
USB 1.1/2.0  
500 mA  
Mass Storage  
File System  
FAT 12/16/32  
MP3 Decoding  
MPEG-1/2 AUDIO Layer-3  
Windows Media™ Audio  
AAC-LC format “.m4a” file  
2-Channel (Stereo)  
5-20,000 Hz ( 1 dB)  
0.008% (at 1 kHz)  
95 dB (at 1 kHz)  
105 dB  
WMA Decoding  
AAC Decoding  
Number of Channels  
Frequency Response*  
Total Harmonic Distortion  
Dynamic Range  
Signal-to-Noise Ratio  
Channel Separation  
85 dB (at 1 kHz)  
* Frequency response may differ depending on the encoder  
software/bit rate.  
GENERAL  
Power Requirement  
14.4 V DC  
(11-16 V allowable)  
50 W × 4  
Maximum Power Output  
Maximum Pre-Output Voltage  
2 V/10 k ohms  
14 dB at 60 Hz  
14 dB at 10 kHz  
1.5 kg (3 lbs. 4 oz)  
Bass  
Treble  
Weight  
26-EN  
 
 
Installation and Connections  
Before installing or connecting the unit, please read the  
following and pages 3 and 5 of this manual thoroughly  
for proper use.  
Caution  
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.  
The wiring and installation of this unit requires special technical  
skill and experience. To ensure safety, always contact the dealer  
where you purchased this product to have the work done.  
Warning  
MAKE THE CORRECT CONNECTIONS.  
Failure to make the proper connections may result in fire or product  
damage.  
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM  
SECURELY.  
Be sure to use only the specified accessory parts. Use of other than  
designated parts may damage this unit internally or may not  
securely install the unit in place. This may cause parts to become  
loose resulting in hazards or product failure.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.  
(Check with your dealer if you are not sure.) Failure to do so may  
result in fire, etc.  
BEFORE WIRING, DISCONNECT THE CABLE FROM THE  
NEGATIVE BATTERY TERMINAL.  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR  
PINCHED BY A SHARP METAL EDGE.  
Failure to do so may result in electric shock or injury due to  
Route the cables and wiring away from moving parts (like the seat  
rails) or sharp or pointed edges. This will prevent crimping and  
damage to the wiring. If wiring passes through a hole in metal, use  
a rubber grommet to prevent the wire’s insulation from being cut by  
the metal edge of the hole.  
electrical shorts.  
DO NOT SPLICE INTO ELECTRICAL CABLES.  
Never cut away cable insulation to supply power to other  
equipment. Doing so will exceed the current carrying capacity of  
the wire and result in fire or electric shock.  
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR  
DUST.  
Avoid installing the unit in locations with high incidence of  
moisture or dust. Moisture or dust that penetrates into this unit may  
result in product failure.  
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING  
HOLES.  
When drilling holes in the chassis for installation, take precautions  
so as not to contact, damage or obstruct pipes, fuel lines, tanks or  
electrical wiring. Failure to take such precautions may result in fire.  
Precautions  
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING  
SYSTEMS TO MAKE GROUND CONNECTIONS.  
Bolts or nuts used for the brake or steering systems (or any other  
safety-related system), or tanks should NEVER be used for  
installations or ground connections. Using such parts could disable  
control of the vehicle and cause fire etc.  
Be sure to disconnect the cable from the (–) battery post before  
installing your CDE-9880R/CDE-9882Ri. This will reduce any  
chance of damage to the unit in case of a short-circuit.  
Be sure to connect the colour coded leads according to the diagram.  
Incorrect connections may cause the unit to malfunction or damage  
to the vehicle’s electrical system.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE  
REACH OF CHILDREN.  
Swallowing them may result in serious injury. If swallowed,  
consult a physician immediately.  
When making connections to the vehicle’s electrical system, be  
aware of the factory installed components (e.g. on-board computer).  
Do not tap into these leads to provide power for this unit. When  
connecting the CDE-9880R/CDE-9882Ri to the fuse box, make  
sure the fuse for the intended circuit of the CDE-9880R/  
CDE-9882Ri has the appropriate amperage. Failure to do so may  
result in damage to the unit and/or the vehicle. When in doubt,  
consult your Alpine dealer.  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER  
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR  
SHIFT LEVER.  
The CDE-9880R/CDE-9882Ri uses female RCA-type jacks for  
connection to other units (e.g. amplifier) having RCA connectors.  
You may need an adaptor to connect other units. If so, please contact  
your authorized Alpine dealer for assistance.  
Doing so may obstruct forward vision or hamper movement etc.  
and results in serious accident.  
Be sure to connect the speaker (–) leads to the speaker (–) terminal.  
Never connect left and right channel speaker cables to each other or  
to the vehicle body.  
IMPORTANT  
SERIAL NUMBER:  
Please record the serial number of your unit in the space provided  
below and keep it as a permanent record. The serial number or the  
engraved serial number is located on the bottom of the unit.  
INSTALLATION DATE:  
INSTALLATION TECHNICIAN:  
PLACE OF PURCHASE:  
27-EN  
 
       
Metal Mounting Strap  
Screw  
2
Installation  
Bolt Stud  
Hex Nut (M5)  
Detachable  
Front Panel  
This unit  
When your vehicle has the Bracket, mount the long  
hex bolt onto the rear panel of the CDE-9880R/  
CDE-9882Ri and put the Rubber Cap on the hex bolt.  
If your vehicle does not have the Mounting Support,  
reinforce the head unit with the metal mounting  
strap (not supplied). Connect all other leads of the  
CDE-9880R/CDE-9882Ri according to details  
described in the CONNECTIONS section.  
Caution  
When you install this unit in your car, do not remove the  
detachable front panel.  
If the detachable front panel is removed during installation, you  
might press too hard and warp the metal plate that holds it in  
place.  
The main unit must be mounted within 35 degrees of the horizontal  
plane, back to front.  
For the screw *, provide a proper screw to the chassis installing  
location.  
Slide the CDE-9880R/CDE-9882Ri into the  
3
dashboard. When the unit is in place, make sure the  
locking pins are fully seated in the down position.  
This can be done by pressing firmly in on the unit  
while pushing the locking pin down with a small  
screwdriver. This ensures that the unit is properly  
locked and will not accidentally come out from the  
dashboard. Install the detachable front panel.  
Less than 35°  
Rubber Cap  
(Included)  
1
Bracket  
Hex Bolt  
(Included)  
Lock Pin  
Mounting Sleeve  
Dashboard  
(Included)  
Pressure Plates*  
This unit  
Removal  
1. Remove the detachable front panel.  
* If the installed mounting sleeve is loose in the dashboard, the  
pressure plates may be bent slightly to remedy the problem.  
2. Use a small screwdriver (or similar tool) to push the  
locking pins to the “up” position (see above drawing).  
As each pin is unlocked, gently pull out on the unit to  
make sure it does not re-lock before unlocking the  
second pin.  
Remove the mounting sleeve from the main unit (see  
“Removal” on page 28). Slide the mounting sleeve  
into the dashboard and fix it with the metal shackles.  
3. Pull the unit out, keeping it unlocked as you do so.  
28-EN  
 
   
<JAPANESE CAR>  
Front Frame  
Screws (M5 × 8)  
(Included)  
This unit  
Mounting Bracket  
USB memory Connection (sold separately)  
Connect USB memory  
Connect USB memory to USB cable.  
USB memory  
(sold separately)  
This unit  
USB connector  
Cable (sold separately)  
Remove USB memory  
Pull out USB memory squarely from the USB cable.  
USB memory  
This unit  
USB connector  
(sold separately)  
Cable (sold separately)  
When removing USB memory, pull it out straight.  
If sound is not output or USB memory is not recognized even when  
USB memory is connected, remove USB memory once, then connect  
it again.  
Change to a source other than the USB memory mode, then remove  
the USB memory. If the USB memory is removed in the USB memory  
mode, data may be damaged.  
Route the USB cable away from another cables, etc.  
29-EN  
 
Connections  
To iPod  
Antenna  
ISO Antenna Plug  
JASO Antenna Plug  
(Pink/Black) AUDIO INTERRUPT IN  
(Blue/White) REMOTE TURN-ON  
To vehicle phone  
To amplifier or equalizer  
To power antenna  
(Red) IGNITION  
To the instrument cluster  
illumination lead  
(Black) GND  
(Blue) POWER ANT  
(Orange) DIMMER  
Ignition Key  
BATTERY  
Battery  
Speakers  
(Yellow)  
(Green)  
Rear Left  
(Green/Black)  
(White)  
Front Left  
Front Right  
Rear Right  
(White/Black)  
(Grey/Black)  
(Grey)  
(Violet/Black)  
(Violet)  
Speakers  
Rear Left  
Amplifier  
Rear Right  
Front Left  
Front Right  
Amplifier  
Amplifier  
Subwoofers  
30-EN  
 
 
iPod Direct Connector  
Battery Lead (Yellow)  
Control iPod signals.  
Connect this lead to the positive (+) post of the vehicle’s  
battery.  
Connect this to an iPod by using the FULL SPEEDTM  
Connection Cable (KCE-422i) (sold separately) or connect  
this to an external device (such as a portable player) by  
using iPod Direct/RCA Interface cable (sold separately).  
ISO Power Supply Connector  
ISO Connector (Speaker Output)  
Left Rear (+) Speaker Output Lead (Green)  
Left Rear (–) Speaker Output Lead (Green/Black)  
Left Front (+) Speaker Output Lead (White)  
Left Front (–) Speaker Output Lead (White/Black)  
Right Front (–) Speaker Output Lead (Grey/Black)  
Right Front (+) Speaker Output Lead (Grey)  
Right Rear (–) Speaker Output Lead (Violet/Black)  
Right Rear (+) Speaker Output Lead (Violet)  
* Refer to “Setting the AUX+ SETUP Mode” (page 20).  
AUX+ON :  
When the external device is connected.  
AUX+OFF : When an iPod is connected.  
Antenna Receptacle  
Audio Interrupt In Lead (Pink/Black)  
Connect this lead to the Audio Interface output of a cellular  
phone which provides ground shorting when a call is  
received.  
Remote Turn-On Lead (Blue/White)  
Connect this lead to the remote turn-on lead of your  
amplifier or signal processor.  
Steering Remote Control Interface Connector  
To steering remote control interface box.  
Fuse Holder (10A)  
Switched Power Lead (Ignition) (Red)  
Connect this lead to an open terminal on the vehicle’s fuse  
box or another unused power source which provides (+)  
12V only when the ignition is turned on or in the accessory  
position.  
Rear Output RCA Connectors  
RED is right and WHITE is left.  
Front Output RCA Connectors  
RED is right and WHITE is left.  
Ground Lead (Black)  
Subwoofer Output RCA Connectors  
Connect this lead to a good chassis ground on the vehicle.  
Make sure the connection is made to bare metal and is  
securely fastened using the sheet metal screw provided.  
RED is right and WHITE is left.  
Power Supply Connector  
USB Connector  
Connect USB cable.  
Power Antenna Lead (Blue)  
Connect this lead to the +B terminal of your power antenna,  
if applicable.  
RCA Extension Cable (sold separately)  
TM  
FULL SPEED Connection Cable (KCE-422i)  
This lead should be used only for controlling the vehicle’s power  
antenna. Do not use this lead to turn on an amplifier or a signal  
processor, etc.  
(CDE-9880R, sold separately; CDE-9882Ri supplied)  
ISO/JASO Antenna Adaptor (sold separately)  
An ISO/JASO antenna adapter may be required, depending  
on the vehicle.  
Dimmer Lead (Orange)  
This lead may be connected to the vehicle’s instrument  
cluster illumination lead. This will enable the vehicle’s  
dimmer control to dim the backlighting of the unit.  
To prevent external noise from entering the audio system.  
Locate the unit and route the leads at least 10 cm away from the car harness.  
Keep the battery power leads as far away from other leads as possible.  
Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.  
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise  
suppressors, contact them for further information.  
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.  
31-EN  
 

3M Projector MP8650 User Manual
AEG Refrigerator SCN71800S0 User Manual
Agri Fab Lawn Mower Accessory 45 02932 User Manual
Air King Ventilation Hood IBIZA SERIES User Manual
Aiwa Stereo System NSX TR77 User Manual
Amana Air Conditioner RCB18C2CP1247513C User Manual
American DJ DJ Equipment TP 1201 User Manual
Balance Scale KH 391 User Manual
Beko DVD Player DVD 2008 User Manual
Beko Fan BKK 1600 P User Manual